ISL70417SEH

FN7962 Rev.5.00

Page 2 of 22

Oct 24, 2019

Ordering Information

ORDERING SMD NUMBER

(Note 2)

PART NUMBER

(Note 1)

TEMPERATURE RANGE

(°C)

PACKAGE

(RoHS COMPLIANT)

PKG.

DWG. #

5962F1222801VXC

ISL70417SEHVF

-55 to +125

14 Ld Flatpack

K14.A

N/A

ISL70417SEHF/PROTO (Note 3)

-55 to +125

14 Ld Flatpack

K14.A

5962F1222801V9AX

ISL70417SEHVX

-55 to +125

DIE

N/A

ISL70417SEHX/SAMPLE (Note 3)

+25

DIE

N/A

ISL70417SEHEVAL1Z (Note 4)Evaluation Board

NOTES:

1. These Pb-free Hermetic packaged products employ 100% Au plate - e4 termination finish, which is RoHS compliant and compatible with both SnPb

and Pb-free soldering operations.

2. Specifications for Rad Hard QML devices are controlled by the Defense Logistics Agency Land and Maritime (DLA). The SMD numbers listed must be

used when ordering.

3. The /PROTO and /SAMPLE are not rated or certified for Total Ionizing Dose (TID) or Single Event Effect (SEE) immunity. These parts are intended for

engineering evaluation purposes only. The /PROTO parts meet the electrical limits and conditions across temperature specified in the DLA SMD and

are in the same form and fit as the qualified device. The /SAMPLE parts are capable of meeting the electrical limits and conditions specified in the

DLA SMD at +25°C only. The /SAMPLE parts do not receive 100% screening across temperature to the DLA SMD electrical limits. These part types

do not come with a Certificate of Conformance because they are not DLA qualified devices.

4. Evaluation board uses the /PROTO parts and /PROTO parts are not rated or certified for Total Ionizing Dose (TID) or Single Event Effect (SEE) immunity.