IDT80KSW0002

Datasheet

CPS-16 Datasheet

47

April 6, 2016

16 Reference Clock

The differential reference clock (REF_CLK+/-) is used to generate the sRIO PHY and internal clocks used in the CPS-16.

Reference Clock Electrical Specifications

The reference clock is 156.25 MHz, and is AC-coupled with the following electrical specifications:

Figure 18 REF_CLK Representative Circuit

Table 25 Input Reference Clock Jitter Specifications

The reference clock wander should not be more than 100ppm (for 156.25 MHz, this is +/-15.625 KHz). This requirement comes from the sRIO

specification that outgoing signals from separate links which belong to the same port should not be separated more than 100ppm.

Note that the series capacitors are discretes that must be placed external to the device’s receivers. All other elements are associated with the input

structure internal to the device. VBIAS is generated internally.

Name

Description

Min

Nom

Max

Units

REF_CLK

REF_CLK clock running at 156.25Mhz

-100

----

+100

ppm

Phase Jitter (rms)

Phase Jitter (rms) (1MHz - 20MHz)

-----

-----

2ps

tDUTY_REF

REF_CLK duty cycle

40

50

60

%

tRCLK/tFCLK

Input signal rise/fall time (20%-80%)

200

500

650

ps

vIN_CML

Differential peak-peak REF_CLK input swing

400

----

2400

mV

RL_CLK

Input termination resistance

40

50

60

ohm

LI_CLK

Input inductance

-----

-----

4nH

CI_CLK

Input capacitance

-----

-----

5pF

5686 drw07

REF_CLK_P

REF_CLK_N

REF_CLK

LI,CLK

CI,CLK

VBIAS,CLK

LI,CLK

CI,CLK

RL,CLK

RL,CLK

+

-