2

Functional description

2.1

Software interface

This section describes the software interface of the device. The host customer application controls the VL53L8CX

using an application programming interface (API). The API implementation is delivered to the customer as a

driver (C code and reference Linux® driver). The driver provides the customer application with a set of high level

functions that allow control of the VL53L8CX firmware. This includes control of items such as device initialization,

ranging start/stop, and mode select.

Figure 7. VL53L8CX system functional description

2.2

Power state machine

Figure 8. Power state machine

Table 4. Power state description

Device state

Description

LP idle

LP (low-power) idle state with data retention

RAM and register content retained

Allow fast resume to HP (high-power)

I²C communication disabled if using LPn

HP idle

HP idle state

Device needs to be in HP idle state to start ranging

Power up state

Ranging

Full operation

VCSEL is active (pulsing)

VL53L8CX

Functional description

DS14161 - Rev 2

page 9/42