STM32H753II datasheet(17/361 Pages) STMICROELECTRONICS

17 / 361 page

DS12117 Rev 8

17/360

STM32H753xI

Description

STM32H753xI devices are based on the high-performance Arm® Cortex®-M7 32-bit RISC

core operating at up to 480 MHz. The Cortex® -M7 core features a floating point unit (FPU)

which supports Arm® double-precision (IEEE 754 compliant) and single-precision data-

processing instructions and data types. STM32H753xI devices support a full set of DSP

instructions and a memory protection unit (MPU) to enhance application security.

STM32H753xI devices incorporate high-speed embedded memories with a dual-bank Flash

memory of 2 Mbytes, up to 1 Mbyte of RAM (including 192 Kbytes of TCM RAM, up to

864 Kbytes of user SRAM and 4 Kbytes of backup SRAM), as well as an extensive range of

enhanced I/Os and peripherals connected to APB buses, AHB buses, 2x32-bit multi-AHB

bus matrix and a multi layer AXI interconnect supporting internal and external memory

access.

All the devices offer three ADCs, two DACs, two ultra-low power comparators, a low-power

RTC, a high-resolution timer, 12 general-purpose 16-bit timers, two PWM timers for motor

control, five low-power timers, a true random number generator (RNG), and a cryptographic

acceleration cell. The devices support four digital filters for external sigma-delta modulators

(DFSDM). They also feature standard and advanced communication interfaces.

•

Standard peripherals

–Four I2Cs

–

Four USARTs, four UARTs and one LPUART

–

Six SPIs, three I2Ss in Half-duplex mode. To achieve audio class accuracy, the

I2S peripherals can be clocked by a dedicated internal audio PLL or by an external

clock to allow synchronization.

–

Four SAI serial audio interfaces

–

One SPDIFRX interface

–

One SWPMI (Single Wire Protocol Master Interface)

–

Management Data Input/Output (MDIO) slaves

–

Two SDMMC interfaces

–

A USB OTG full-speed and a USB OTG high-speed interface with full-speed

capability (with the ULPI)

–

One FDCAN plus one TT-FDCAN interface

–

An Ethernet interface

–

Chrom-ART Accelerator

–

HDMI-CEC

•

Advanced peripherals including

–

A flexible memory control (FMC) interface

–

A Quad-SPI Flash memory interface

–

A camera interface for CMOS sensors

–

An LCD-TFT display controller

–

A JPEG hardware compressor/decompressor

Refer to Table 2: STM32H753xI features and peripheral counts for the list of peripherals

available on each part number.

STM32H753II датащи(PDF) 17 Page - STMicroelectronics

STM32H753II датащи(HTML) 17 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL