| поискавой системы для электроныых деталей |
|
L9945 датащи(PDF) 122 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
L9945 датащи(HTML) 122 Page - STMicroelectronics |
|
122 / 151 page ![]() Figure 27. NDIS/DIS release before NRES release: tCC is selected as watchdog starting timer value. Then, CC timer switches to tCC. typ 132ms NRES DIS NDIS CC function CC timing disabled enabled 110...165ms 55...80ms 55...80ms GAPG0102161058CFT The distinction between tCC and tCC_INIT applies only at the beginning of CC. After the first valid SPI frame, CC always operates with tCC deadline. In case of no valid communication the CC timer will expire and disable all related outputs. With the next valid communication the outputs are enabled. Each correct communication restarts the CC timer. If a CC failure is detected, all channels except 7 and 8 are actively turned off and the CC_LATCH is set high (cleared on SPI readout). The CC can be deactivated by programming the CONFIG_CC field via SPI. By default CC is active. CC status can be monitored by reading the config_CC_STATE SPI bit. Note: When configured as H-Bridge, channels 7 and 8 are handled like other channels and are disabled in case of CC failure. Table 35. CC timings Symbol Parameter Min. Max. Unit tCC Communication Timeout 55 85 ms tCC_INIT Deadline for the first communication engagement in case DIS/NDIS are released before NRES release. 110 165 ms 6.2 Diagnostics overview The device performs two types of diagnostics for each output channel: • ON state diagnostics: overcurrent (OC) detection; • OFF state diagnostics: open load (OL), short to ground (STG), and short to battery (STB) detection. Diagnostic can be enabled/disabled by programming the ENABLE_DIAGNOSTIC bit. The AN "L9945_Diagnostics_Explained" covers all the main aspects of diagnostics and helps choosing the correct values for the tblank_oc and tdiag filter times. Diagnostic report for all channels is readable via SPI, after having issued the 0x9AAA0001 frame. The diagnostic status of each channel is encoded in 3 bit (diag_xx[2-0]), as shown in the table below. L9945 Diagnostics overview DS12275 - Rev 8 page 122/151 |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |