L9374LF datasheet(24/80 Pages) STMICROELECTRONICS

номер детали	L9374LF

подробное описание детали	Four channel valve driver

PDF	80 Pages

Scroll/Zoom	100%

производитель	STMICROELECTRONICS [STMicroelectronics]

домашняя страница	http://www.st.com

Logo

24 / 80 page

Circuit description

L9374LF

24/80

DocID025414 Rev 1

4.1.2

SPI failure detection

SPI communications sent to the L9374LF that contain errors are ignored. This inaction

includes both the commands given and the data retrieved. That is, commands are ignored

and the initial state of the output is not changed. Also data registers referenced by the

erroneous SPI communication will not be reset.

Figure 12. SPI error handling

Three functions are monitored to discern a correct SPI communication from the master:

Correct number of Clock pulses in SPICLK per transfer.

During each SPICS-low-phase the L9374LF counts the number of positive edges of

SPICLK. If this number is unequal to 16 a SPICLK-error is detected.

Parity check (odd)

The L9374LF detects a parity error if the number of ‘1’s within a transfer is even.

Data-failure monitoring:

This bit is set if the master writes inappropriate data to any of the configuration

registers (2/14/15).

4.1.3

Data transfer

Upon the completion of each 16 bit SPI command (rising edge of SPICS), data is

transferred from the SPI block to the appropriate internal registers. Some internal SPI

registers are reset (such as fault bits) once they are accessed.

L9374LF датащи(PDF) 24 Page - STMicroelectronics