| поискавой системы для электроныых деталей |
|
CC2430-RTR1-F32Z датащи(PDF) 114 Page - Texas Instruments |
|
|
|||||||||||||||||||||||||||||
CC2430-RTR1-F32Z датащи(HTML) 114 Page - Texas Instruments |
|
114 / 234 page ![]() CC2430 CC2430 PRELIMINARY Data Sheet (rev. 1.03) SWRS036A Page 114 of 232 T2THD (0xA7) – Timer 2 Timer Value High Byte Bit Name Reset R/W Description 7:0 THD[7:0] 0x00 R/W The value read from this register is the high-order byte of the timer value. The high-order byte read is from timer value at the last instant when T2TLD was read. The value written to this register while the timer is running is the high- order byte of the timer delta counter value. The low-order byte of this value is the value last written to T2TLD. The timer will halt for delta clock cycles. The value written to this register while the timer is idle will be written to the high-order byte of the timer. T2TLD (0xA6) – Timer 2 Timer Value Low Byte Bit Name Reset R/W Description 7:0 TLD[7:0] 0x00 R/W The value read from this register is the low-order byte of the timer value. The value written to this register while the timer is running is the low- order byte of the timer delta counter value. The timer will halt for delta clock cycles. The value written to T2TLD will not take effect until T2THD is written. The value written to this register while the timer is idle will be written to the low-order byte of the timer. T2CMP (0x94) – Timer 2 Compare Value Bit Name Reset R/W Description 7:0 CMP[7:0] 0x00 R/W Timer Compare value. A timer compare occurs when the compare source selected by T2CNF.CMSEL equals the value held in CMP. T2OF2 (0xA3) – Timer 2 Overflow Count 2 Bit Name Reset R/W Description 7:4 - 0000 R0 Not used, read as 0 3:0 OF2[3:0] 0x00 R/W Overflow count. High bits T2OF[19:16]. T2OF is incremented by 1 each time the timer overflows i.e. timer counts to a value greater or equal to period. When reading this register, the value read is the value latched when T2OF0 was read. Writing to this register when the timer is in IDLE or RUN states will force the overflow count to be set to the value written to T2OF2:T2OF1:T2OF0. If the count would otherwise be incremented by 1 when this register is written then 1 is added to the value written. |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |