UCD7100APWPR datasheet(14/30 Pages) TI

номер детали	UCD7100APWPR

подробное описание детали	UCD7100 Digital Control Compatible Single Low-Side 짹4-A MOSFET Driver with Current Sense

PDF	30 Pages

Scroll/Zoom	100%

производитель	TI [Texas Instruments]

домашняя страница	http://www.ti.com

Logo

14 / 30 page

Note

The 10% and 90% thresholds depict the dynamics of the bipolar output devices that dominate the

power MOSFET transition through the Miller regions of operation.

9.4 Device Functional Modes

9.4.1 Operation with VDD < 4.25 V (minimum VDD)

The devices operate with VDD voltages above 4.75 V. The maximum UVLO voltage is 4.75 V, and operates at

VDD voltages above 4.75 V. The typical UVLO voltage is 4.5 V. The minimum UVLO voltage is 4.25 V. At VDD

below the actual UVLO voltage, the devices do not operate, and OUT remains low.

9.4.2 Operation with IN Pin Open

If the IN pin is disconnected (open), a 100 kΩ internal resistor connects IN to GND to prevent unpredictable

operation due to a floating IN pin, and OUT remains low.

9.4.3 Operation with ILIM Pin Open

If the ILIM pin is disconnected (open), the current limit threshold is set at 0.5 V.

9.4.4 Operation with ILIM Pin High

If the signal on ILIM pin is higher than 1 V, the current limit threshold is clamped at 1 V.

UCD7100

SLUS651E – MARCH 2005 – REVISED NOVEMBER 2021

www.ti.com

Submit Document Feedback

Product Folder Links: UCD7100

UCD7100APWPR датащи(PDF) 14 Page - Texas Instruments