EDSTRG28PLCCCX datasheet(30/78 Pages) TI

30 / 78 page

OPERATING CONDITIONS AND CHARACTERISTICS

1–22

POST OFFICE BOX 1443

• HOUSTON, TEXAS 77251–1443

operating conditions and characteristics

This section defines the current and voltage operating conditions and characteristics.

current

high-level input current, IIH

The current into an input when a high-level voltage is applied to that input.

high-level output current, IOH

The current into an output with input conditions applied that, according to the product specification, establishes

a high level at the output.

low-level input current, IIL

The current into an input when a low-level voltage is applied to that input.

low-level output current, IOL

The current into an output with input conditions applied that, according to the product specification, establishes

a low level at the output.

supply current, ICC, ICC2, ICC3, IPP, ICCSTBY

The current into, respectively, the (VCC= VCC1), VCC2, VCC3, VPP, VCCSTBY supply terminals.

operating free-air temperature, TA

The temperature range over which the device operates and the range which meets the specified electrical

characteristics.

voltage

high-level input voltage, VIH

An input voltage within the more positive (less negative) of the two ranges of values used to represent the binary

variables.

NOTE: A minimum is specified that is the least positive value of high-level input voltage for which of the logic element within specification

limits is assured.

high-level output voltage, VOH

The voltage at an output terminal with input conditions applied that, according to the product specification,

establishes a high level at the output.

low-level input voltage, VIL

An input voltage level within the less positive (more negative) of the two ranges of values is used to represent

the binary variables.

NOTE: The most positive value of low-level input voltage is specified for which operation of the logic element within specification limits is

assured.

low-level output voltage, VOL

The voltage at an output terminal with input conditions applied that, according to the product specification,

establishes a low level at the output.

supply voltages, (VCC= VCC1), VCC2, VCC3, VPP, and VCCSTBY

The voltages supplied to the corresponding voltage pins that are required for the device to function. One to four

of these supplies may be necessary, along with ground(s) (VSS= VSS1, VSS2, and VSS3).

EDSTRG28PLCCCX датащи(PDF) 30 Page - Texas Instruments

EDSTRG28PLCCCX датащи(HTML) 30 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78

датащи скачать

ссылки URL