TOSHIBA

TOSHIBA CORPORATION

1/32

TLCS-47E Series

TMP47C101/201

The information contained here is subject to change without notice.

The information contained herein is presented only as guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties

which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of TOSHIBA or others. These TOSHIBA products are intended for usage in general electronic

equipments (office equipment, communication equipment, measuring equipment, domestic electrification, etc.) Please make sure that you consult with us before you use these TOSHIBA products in equip-

ments which require high quality and/or reliability, and in equipments which could have major impact to the welfare of human life (atomic energy control, spaceship, traffic signal, combustion control, all types

of safety devices, etc.). TOSHIBA cannot accept liability to any damage which may occur in case these TOSHIBA products were used in the mentioned equipments without prior consultation with TOSHIBA.

CMOS 4-bit Microcontroller

TMP47C101P, TMP47C201P,

TMP47C101M, TMP47C201M

The 47C101/201 are high speed and high performance 4-bit sin-

gle chip microcomputers, integrating ROM, RAM, input/output

ports and timer/counters on a chip. The 47C101/201 are the

standard type devices in the TLCS-47E series.

Part No.

ROM

RAM

Package

OTP

Piggyback + Adapter

TMP47C101P

1024 x 8-bit

64 x 4-bit

DIP16

TMP47P201VP

TMP47C990E

+ BM1160 (for DIP)

TMP47C101M

SOP16

T.B.D.

TMP47C201P

2048 x 8-bit

128 x 4-bit

DIP16

TMP47P201VP

TMP47C201M

SOP16

T.B.D.

Features

• 4-bit single chip microcomputer

• Instruction execution time: 1.3

µs (at 6MHz)

• Low voltage operation: 2.2V (at 2MHz RC)

• 89 basic instructions

- Instruction set is the same as TLCS-47 series

• ROM table look-up instructions

• Subroutine nesting: 15 levels max.

• 5 interrupt sources (External: 2, Internal: 3)

- All sources have independent latches each, and multiple

interrupt control is available

• I/O port (11 pins)

• 12-bit Timer/Counters (TC2)

- Timer, event counter, and pulse width measurement

mode

• 12-bit programmable Timer (TC1)

• Interval Timer

• High current outputs

- LED direct drive capability: typ. 20mA x 4 bits (Port R4)

• Hold function

- Battery/Capacitor back-up

• Real Time Emulator: BM4721A + BM1160 (for DIP)