Self-Leveling and DP600NS

4

Note: The following technical information and data should be considered representative or

typical only and should not be used for specification purposes.

Environmental Resistance, Aluminum (Etched),

Measured by Overlap Shear Tested @ 73°F (23°C) (PSI) (ASTM D1002)

Environment

Condition

DP600

Self-Leveling

DP600NS

Room

Temperature

73°F(23°C)/50%RH, 30

days

100%

100%

Water Vapor

150°F (66°C)/ 80% RH, 30

days

100%

125%

Water Soak

73°F (23°C) , 30 days

70%

50%

IPA

73°F (23°C), 30 days

immersion

70%

75%

Gasoline

73°F (23°C), 30 days

immersion

75%

100%

Prepare the Concrete for the Vertical Repair and/or Custom Tap

1.

Remove all loose aggregate, dust, old caulks, grease and

waterproofing compounds from repair surface. (Grind away any

absorbed oils to ensure a clean surface.)

2.

Clean repair surface with a bristle brush and use moisture and

oil-free compressed air to blow out debris.

3.

Mask off area surrounding repair.

Repairing Concrete Damage from Corrosion

1.

Apply a pre-coat of cement corrosion inhibitor or protectant to

excessively corroded areas.

2.

Allow pre-coat to dry thoroughly.

3.

Follow the procedure for general concrete repairs.

Typical Adhesive

Performance

Characteristics

(continued)

Installation

Instructions

for Concrete

Repair