8

Packaging and labeling

8.1

Product marking

A two-line product marking is applied on the backside of the module (i.e. on the substrate). The first line is the

silicon product code, and the second line, the internal tracking code (see figure below).

8.2

Inner box labeling

The labeling follows the ST standard packing acceptance specification.

The following information is written on the inner box label:

•

Assembly site

•

Sales type

•

Quantity

•

Trace code

•

Marking

•

Bulk ID number

8.3

Packing

At customer/subcontractor level, it is recommended to mount the device in a clean environment to avoid foreign

material deposition.

To help avoid any foreign material contamination at phone assembly level the modules will be shipped in a tape

and reel format, starting from production version (cut1.1). The tape is described in the Figure 22. Tape outline

drawing.

The packaging will be vacuum-sealed and include a desiccant.

VL53L3CX

Packaging and labeling

DS13204 - Rev 2

page 25/35