| поискавой системы для электроныых деталей |
|
CS42418 датащи(PDF) 41 Page - Cirrus Logic |
|
|
|||||||||||||||||||||||||||||
CS42418 датащи(HTML) 41 Page - Cirrus Logic |
|
41 / 67 page ![]() 41 CS42418 The Digital-to-Analog converters of the CS42418 will mute the output following the reception of 8192 consecutive audio samples of static 0 or -1. A single sample of non-static data will release the mute. Detection and muting is done independently for each channel. The quiescent voltage on the output will be retained and the MUTEC pin will go active during the mute period. The muting function is af- fected, similar to volume control changes, by the Soft and Zero Cross bits (SZC[1:0]). 5.10.4 SOFT VOLUME RAMP-UP AFTER ERROR (RMP_UP) Default = 0 0 - Disabled 1 - Enabled Function: An un-mute will be performed after executing a filter mode change, after a MCLK/LRCK ratio change or error, and after changing the Functional Mode. When this feature is enabled, this un-mute is affect- ed, similar to attenuation changes, by the Soft and Zero Cross bits (SZC[1:0]). When disabled, an im- mediate un-mute is performed in these instances. Note: For best results, it is recommended that this bit be used in conjunction with the RMP_DN bit. 5.10.5 SOFT RAMP-DOWN BEFORE FILTER MODE CHANGE (RMP_DN) Default = 0 0 - Disabled 1 - Enabled Function: A mute will be performed prior to executing a filter mode or de-emphasis mode change. When this feature is enabled, this mute is affected, similar to attenuation changes, by the Soft and Zero Cross bits (SZC[1:0]). When disabled, an immediate mute is performed prior to executing a filter mode or de-emphasis mode change. Note: For best results, it is recommended that this bit be used in conjunction with the RMP_UP bit. 5.11 Channel Mute (address 0Eh) 5.11.1 INDEPENDENT CHANNEL MUTE (XX_MUTE) Default = 0 0 - Disabled 1 - Enabled Function: The Digital-to-Analog converter outputs of the CS42418 will mute when enabled. The quiescent volt- age on the outputs will be retained. The muting function is affected, similar to attenuation changes, by the Soft and Zero Cross bits (SZC[1:0]). 76543 210 B4_MUTE A4_MUTE B3_MUTE A3_MUTE B2_MUTE A2_MUTE B1_MUTE A1_MUTE |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |