STR720RXH6 datasheet(65/401 Pages) STMICROELECTRONICS

номер детали	STR720RXH6

подробное описание детали	ARM720T 16/32-BIT MCU WITH 16K RAM, USB, CAN, 3 TIMERS, ADC, 6 COMMUNICATIONS INTERFACES

PDF	401 Pages

Scroll/Zoom	100%

производитель	STMICROELECTRONICS [STMicroelectronics]

домашняя страница	http://www.st.com

Logo

65 / 401 page

STR720 - ENHANCED INTERRUPT CONTROLLER (EIC)

65/401

Source Interrupt Registers - Channel n (SIRn)

Address Offset: 60h to DCh

Reset value: 0000 0000h

There are 32 different SIRn registers, as many as the input interrupt channels are.

Bit 31:16 = SIV[31:16]: Source Interrupt Vector for interrupt channel n (n = 0... 31).

This field contains the interrupt channel depending part of the interrupt vector, that will be

provided to the processor when the Interrupt Vector Register (Address 0x18h) is read.

Depending on what the processor expects (32 bit address or instruction, see IVR description),

the SIV will have to be loaded with the interrupt channel ISR address offset or with the lower

part (including the jump offset) of the first ISR instruction.

Bit 15:4: Reserved.

Bit 3:0 = SIPL[3:0]: Source Interrupt Priority Level for interrupt channel n (n = 0... 31).

These 4 bits allow to associate the interrupt channel to a priority value between 0 and 15. The

reset value is 0.

Note

To be processed by the EIC priority logic, an interrupt channel must have a priority

level higher than the current interrupt priority (CIP); the lowest value CIP can have is

0, so all the interrupt sources that have a priority level equal to 0 will never generate

an IRQ request, even if properly enabled.

SIV[31:16]

765432

reserved

SIPL[3:0]

-rw

STR720RXH6 датащи(PDF) 65 Page - STMicroelectronics