MP2625BGL datasheet(5/31 Pages) MPS

5 / 31 page

MP2625B – SINGLE CELL SWITCHING CHARGER WITH POWER PATH CONTROL

MP2625B Rev. 1.01

www.MonolithicPower.com

1/15/2018

MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.

ABSOLUTE MAXIMUM RATINGS

(1)

IN, SW .........................................-0.3V to +20V

BATT, SYS .....................................-0.3V to +6V

BST...............................................-0.3V to +26V

All Other Pins..................................-0.3V to +6V

Continuous Power Dissipation (TA = +25°C)

(2)

QFN20 3mmx4mm..................................... 2.6W

Junction Temperature...............................150

C

Lead Temperature ....................................260

C

Storage Temperature.................–65°C to 150°C

Recommended Operating Conditions

(3)

Supply Voltage VIN ...........................4.0V to 10V

Operating Junction Temp. (TJ).... -40°C to +125°C

Thermal Resistance

(4)

θJA

θJC

QFN-20 (3mmx4mm).............. 48 ...... 11...

C/W

Notes:

1) Exceeding these ratings may damage the device.

2) The maximum allowable power dissipation is a function of the

maximum junction temperature TJ (MAX), the junction-to-

ambient thermal resistance θJA, and the ambient temperature

TA. The maximum allowable continuous power dissipation at

any ambient temperature is calculated by PD (MAX) = (TJ

(MAX)-TA)/θJA. Exceeding the maximum allowable power

dissipation will cause excessive die temperature, and the

regulator will go into thermal shutdown. Internal thermal

shutdown circuitry protects the device from permanent

damage.

3) The device is not guaranteed to function outside of its

operating conditions.

4) Measured on JESD51-7, 4-layer PCB.

MP2625BGL датащи(PDF) 5 Page - Monolithic Power Systems

MP2625BGL датащи(HTML) 5 Page - Monolithic Power Systems

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31

датащи скачать

ссылки URL