FN9025 Rev 9.00

Page 9 of 13

November 12, 2015

HIP2101

Intersil products are manufactured, assembled and tested utilizing ISO9001 quality systems as noted

in the quality certifications found at www.intersil.com/en/support/qualandreliability.html

Intersil products are sold by description only. Intersil may modify the circuit design and/or specifications of products at any time without notice, provided that such

modification does not, in Intersil's sole judgment, affect the form, fit or function of the product. Accordingly, the reader is cautioned to verify that datasheets are

current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its

subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or

otherwise under any patent or patent rights of Intersil or its subsidiaries.

For information regarding Intersil Corporation and its products, see www.intersil.com

For additional products, see www.intersil.com/en/products.html

© Copyright Intersil Americas LLC 2004-2015. All Rights Reserved.

All trademarks and registered trademarks are the property of their respective owners.

About Intersil

Intersil Corporation is a leading provider of innovative power management and precision analog solutions. The company's products

address some of the largest markets within the industrial and infrastructure, mobile computing and high-end consumer markets.

For the most updated datasheet, application notes, related documentation and related parts, please see the respective product

information page found at www.intersil.com.

You may report errors or suggestions for improving this datasheet by visiting www.intersil.com/ask.

Reliability reports are also available from our website at www.intersil.com/support.

Revision History

The revision history provided is for informational purposes only and is believed to be accurate, but not warranted. Please go to the web to make

sure that you have the latest revision

.

DATE

REVISION

CHANGE

November 12, 2015

FN9025.9

- Updated Ordering Information Table on page 1.

- Added Revision History.

- Added About Intersil Verbiage.

- Updated POD L12.4X4A to latest revision changes are as follow:

Updated to new POD format by removing table listing dimensions and moving dimensions onto

drawing.

Added Typical Recommended Land Pattern.

Bottom View changed "3.2 REF" TO "2.5 REF"

Typical Recommended Land Pattern changed "3.80" to "3.75"

From: Tiebar shown (if present) is a non-functional feature.

To: Tiebar shown (if present) is a non-functional feature and may be located on any of the 4 sides (or

ends).

- Updated POD M8.15 to latest revision changes are as follow:

Updated to new POD format by removing table and moving dimensions onto drawing and adding land

pattern.

Changed in Typical Recommended Land Pattern the following:

2.41(0.095) to 2.20(0.087)

0.76 (0.030) to 0.60(0.023)

0.200 to 5.20(0.205)

Changed Note 1 "1982" to "1994"

- Updated POD M8.15C to most current version.

Removed "u" symbol from drawing (overlaps the "a" on Side View).