HAR 24xy

DATA SHEET

22

July 14, 2015; DSH000170_001EN

Micronas

4.6. Absolute Maximum Ratings

Stresses beyond those listed in the “Absolute Maximum Ratings” may cause permanent damage to the device. This

is a stress rating only. Functional operation of the device at these conditions is not implied. Exposure to absolute

maximum rating conditions for extended periods will affect device reliability.

This device contains circuitry to protect the inputs and outputs against damage due to high static voltages or electric

fields; however, it is advised that normal precautions be taken to avoid application of any voltage higher than abso-

lute maximum-rated voltages to this circuit.

All voltages listed are referenced to ground (GND1=GND2=GNDePad).

4.7. Storage and Shelf Life

Information related to storage conditions of Micronas sensors is included in the document “Guidelines for the

Assembly of Micronas Packages”. It gives recommendations linked to moisture sensitivity level and long-term stor-

age.

It is available on the Micronas website (http://www.micronas.com/en/service-center/downloads) or on the service

portal (http://service.micronas.com).

Symbol

Parameter

Pin

Min.

Max.

Unit

Condition

Supply Voltage

VSUPx

8.5

18

10

18

V

V

Output Voltage

OUTx

18

V

Excess of Output Voltage

over Supply Voltage

OUTx



VSUPx



7V

Junction Temperature

under Bias

50

°C

4)

Dielectric Strength

between Both Dies

500

500

V

5)6)

ESD Protection for Single

Die

VSUP1

OUT1

GND1

8+8

kV

3)

VSUP2

OUT2

GND2



)