MB39C014 datasheet(29/32 Pages) CYPRESS

29 / 32 page

Document Number: 002-08361 Rev. *C

Page 29 of 32

MB39C014

13. Usage Precautions

Do not Configure the IC Over the Maximum Ratings

lf the lC is used over the maximum ratings, the LSl may be permanently damaged.

It is preferable for the device to normally operate within the recommended usage conditions. Usage outside of these conditions can

adversely affect reliability of the LSI.

Use the Devices Within Recommended Operating Conditions

The recommended operating conditions are the conditions under which the LSl is guaranteed to operate.

The electrical ratings are guaranteed when the device is used within the recommended operating conditions and under the conditions

stated for each item.

Printed Circuit Board Ground Lines Should be Set up With Consideration for Common Impedance

Take Appropriate Static Electricity Measures.

■ Containers for semiconductor materials should have anti-static protection or be made of conductive material.

■ After mounting, printed circuit boards should be stored and shipped in conductive bags or containers.

■ Work platforms, tools, and instruments should be properly grounded.

■ Working personnel should be grounded with resistance of 250 kΩ to 1 MΩ between body and ground.

Do not Apply Negative Voltages.

The use of negative voltages below

− 0.3 V may create parasitic transistors on LSI lines, which can cause

abnormal operation.

14. Ordering Information

15. RoHS Compliance Information

The LSI products of Cypress with “E1” are compliant with RoHS Directive, and has observed the standard of lead, cadmium, mercury,

hexavalent chromium, polybrominated biphenyls (PBB), and polybrominated diphenylethers (PBDE).

A product whose part number has trailing characters “E1” is RoHS compliant.

Part Number

Package

Remarks

MB39C014PN-

❏❏❏E1

10-pin plastic SON

(WNK010)

–

MB39C014 датащи(PDF) 29 Page - Cypress Semiconductor