| поискавой системы для электроныых деталей |
|
SSD1850 датащи(PDF) 27 Page - List of Unclassifed Manufacturers |
|
|
|||||||||||||||||||||||||||||
SSD1850 датащи(HTML) 27 Page - List of Unclassifed Manufacturers |
|
27 / 56 page ![]() SSD1850/51 Series Rev 1.2 01/2003 SOLOMON 23 mapped to 3 lines to 33 lines respectively. Value 00000b disables the N-line inversion, which is the POR value. To avoid a fix polarity at some lines, it should be noted that the total number of mux (including the icon line) should NOT be a multiple of the lines of inversion (n). 50~56 0 1 0 1 0 B2 B1 B0 Set LCD Bias Sets the LCD bias from 1/4 ~ 1/10 according to B2B1B0: 000: 1/4 bias 001: 1/5 bias 010: 1/6 bias 011: 1/7bias 100: 1/8 bias 101: 1/9 bias (POR for SSD1850) 110: 1/9 bias (SSD1850); 1/10 bias (POR for SSD1851) 57~63 Reserved Reserved 64~67 0 1 1 0 0 1 B1 B0 Set DC-DC Converter Factor Sets the DC-DC multiplying factor from 2X to 6X B1B0: 00: 2X/3X (POR, 2X or 3X multiplying depended on the DC-DC converter hardware configuration) 01: 4X 10: 5X 11: 5X (SSD1850); 6X (SSD1851) 68~80 Reserved Reserved 81 1 X 0 X 0 C5 0 C4 0 C3 0 C2 0 C1 1 C0 Set Contrast Control Register The next command sets one of the 64 contrast levels. The darkness increase as the contrast level increase. The level is set to 32 after POR. 82 1 1 0 1 0 1 0 1 0 X3 0 X2 1 X1 0 X0 OTP Setting Set the desired VL6 voltage value: 0000: original contrast 0001: original contrast +1 step 0010: original contrast +2 steps 0011: original contrast +3 steps 0100: original contrast +4 steps 0101: original contrast +5 steps 0110: original contrast +6 steps 0111: original contrast +7 steps 1000: original contrast -8 steps 1001: original contrast -7 steps 1010: original contrast -6 steps 1011: original contrast -5 steps 1100: original contrast -4 steps 1101: original contrast -3 steps 1110: original contrast -2 steps 1111: original contrast -1 step 83 1 0 0 0 0 0 1 1 OTP Programming Please refer the sequence of OTP programming 84~87 Reserved Reserved 88 1 WB3 0 WB2 0 WB1 0 WB0 1 WA3 0 WA2 0 WA1 0 WA0 Set White mode, Frame 2 nd & 1st 89 1 WD3 0 WD2 0 WD1 0 WD0 1 WC3 0 WC2 0 WC1 1 WC0 Set White mode, Frame 4 th & 3rd Set gray scale mode and register. These are two-byte commands used to specify the contrast levels for the gray scale, 4 levels available. After power on reset, |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |