(WE# Controlled) (1,2,3,5,6)

(CE# and CE2 Controlled) (1,2,5,6)

Notes :

1.WE#, CE# must be high or CE2 must be low during all address transitions.

2.A write occurs during the overlap of a low CE#, high CE2, low WE#.

placed on the bus.

4.During this period, I/O pins are in the output state, and input signals must not be applied.

5.If the CE#low transition and CE2 high transition occurs simultaneously with or after WE# low transition, the outputs remain in a high

impedance state.