Chip Resistor Surface Mount

www.yageo.com

Mar. 07, 2017 V.7

Product specification

3

10

SERIES

RC_L

0075 to 2512

MARKING

RC0075 / RC0100 / RC0201 / RC0402

No Marking

RC0603

E24 series: 3 digits

First two digits for significant figure and 3rd digit for number of zeros

RC0805 / RC1206 / RC1210 / RC2010 / RC2512

E24/E96 series: 4 digits

First three digits for significant figure and 4th digit for number of zeros

RC1218

E-24 series: 3 digits, ±5%

First two digits for significant figure and 3rd digit for number of zeros

Both E-24 and E-96 series: 4 digits, ±1% & ±0.5%

First three digits for significant figure and 4th digit for number of zeros

For further marking information, please see special data sheet "Chip resistors marking".

Fig. 2

Value = 10 KΩ

03

PF series

Note: construction will be

adjusted to resistance value

(only for PF series).

Fig. 3

Value = 10 KΩ

00

CONSTRUCTION

The resistor is constructed on top of a high-grade

ceramic body. Internal metal electrodes are added

on each end to make the contacts to the thick

film resistive element. The composition of the

resistive element is a noble metal imbedded into a

glass and covered by a second glass to prevent

environmental influences. The resistor is laser

trimmed to the rated resistance value. The

resistor is covered with a protective epoxy

coat, finally the two external terminations (matte

tin on Ni-barrier) are added, as shown in Fig.6.

Fig. 1

Fig. 4

Value = 10 KΩ

Fig. 5

Value = 10 KΩ

00

Fig. 6 Chip resistor outlines

O

For dimensions, please refer to Table 1