STM32F078CB datasheet(85/120 Pages) STMICROELECTRONICS

85 / 120 page

DocID026006 Rev 4

85/120

STM32F078CB, STM32F078RB, STM32F078VB

Electrical characteristics

Figure 27. 12-bit buffered / non-buffered DAC

1. The DAC integrates an output buffer that can be used to reduce the output impedance and to drive external

loads directly without the use of an external operational amplifier. The buffer can be bypassed by

configuring the BOFFx bit in the DAC_CR register.

Gain error(3) Gain error

±0.5

Given for the DAC in 12-bit

configuration

tSETTLING(3)

Settling time (full scale: for a

10-bit input code transition

between the lowest and the

highest input codes when

DAC_OUT reaches final

value ±1LSB

-3

µs

CLOAD ≤ 50 pF, RLOAD ≥ 5 kΩ

Update

rate(3)

Max frequency for a correct

DAC_OUT change when

small variation in the input

code (from code i to i+1LSB)

MS/s CLOAD ≤ 50 pF, RLOAD ≥ 5 kΩ

tWAKEUP(3)

Wakeup time from off state

(Setting the ENx bit in the

DAC Control register)

-6.5

µs

CLOAD ≤ 50 pF, RLOAD ≥ 5 kΩ

input code between lowest and

highest possible ones.

PSRR+ (1)

Power supply rejection ratio

(to VDDA) (static DC

measurement

–67

–40

No RLOAD, CLOAD = 50 pF

1. Guaranteed by design, not tested in production.

2. The DAC is in “quiescent mode” when it keeps the value steady on the output so no dynamic consumption is involved.

3. Data based on characterization results, not tested in production.

Table 58. DAC characteristics (continued)

Symbol

Parameter

Min

Typ

Max

Unit

Comments

STM32F078CB датащи(PDF) 85 Page - STMicroelectronics

STM32F078CB датащи(HTML) 85 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL