ST10F296 datasheet(312/346 Pages) STMICROELECTRONICS

номер детали	ST10F296

подробное описание детали	High performance 16-bit CPU with DSP functions

PDF	346 Pages

Scroll/Zoom	100%

производитель	STMICROELECTRONICS [STMicroelectronics]

домашняя страница	http://www.st.com

Logo

312 / 346 page

Obsolete

Product(s)

- Obsolete

Product(s)

Electrical characteristics

ST10F296E

312/346

Figure 103. Float waveforms

For timing purposes, a port pin is no longer floating when VLOAD changes of ±100 mV occur.

VLOAD begins to float when a 100 mV change from the loaded VOH/VOL level occurs (IOH/IOL = 20 mA).

24.8.2

Definition of internal timing

The internal operation of the ST10F296E is controlled by the internal CPU clock fCPU. Both

edges of the CPU clock can trigger internal (for example, pipeline) or external (for example,

bus cycle) operations.

The specification of the external timing (AC characteristics) depends on the time (TCL)

between two consecutive edges of the CPU clock.

The CPU clock signal can be generated by different mechanisms. The duration of TCL and

its variation (and also the derived external timing) depends on the mechanism used to

generate fCPU.

The fCPU influence must be regarded when calculating the timings for the ST10F296E.

The example for PLL operation shown in Figure 104 refers to a PLL factor of four.

The mechanism used to generate the CPU clock is selected during reset by the logic levels

on pins P0.15-13 (P0H.7-5).

Timing

reference

points

VLOAD + 0.1 V

VLOAD - 0.1 V

VOH - 0.1 V

VOL + 0.1 V

VLOAD

VOL

VOH

Obsolete

Product(s)

- Obsolete

Product(s)

ST10F296 датащи(PDF) 312 Page - STMicroelectronics