SPC560B64X datasheet(18/133 Pages) STMICROELECTRONICS

18 / 133 page

Package pinouts and signal descriptions

SPC560B54x/6x

18/133

DocID15131 Rev 9

3.5

Pad types

In the device the following types of pads are available for system pins and functional port

pins:

S = Slow(d)

M = Medium(d) (e)

F = Fast(d) (e)

I = Input only with analog feature(d)

J = Input/Output (‘S’ pad) with analog feature

X = Oscillator

3.6

System pins

The system pins are listed in Table 5.

VDD_BV

Internal regulator supply voltage

VSS_HV_ADC0

Reference ground and analog

ground for the A/D converter 0 (10-

bit)

R15

VDD_HV_ADC0

Reference voltage and analog

supply for the A/D converter 0 (10-

bit)

P14

VSS_HV_ADC1

Reference ground and analog

ground for the A/D converter 1 (12-

bit)

N12

VDD_HV_ADC1

Reference voltage and analog

supply for the A/D converter 1 (12-

bit)

K13

A decoupling capacitor must be placed between each of the three VDD_LV/VSS_LV supply pairs to ensure stable voltage

(see the recommended operating conditions in the device datasheet).

Table 4. Voltage supply pin descriptions (continued)

Port pin

Function

Pin number

LQFP100

LQFP144

LQFP176

LBGA208

See the I/O pad electrical characteristics in the chip datasheet for details.

All medium and fast pads are in slow configuration by default at reset and can be configured as fast or medium.

The only exception is PC[1] which is in medium configuration by default (see the PCR.SRC description in the

chip reference manual, Pad Configuration Registers (PCR0–PCR148)).

SPC560B64x датащи(PDF) 18 Page - STMicroelectronics

SPC560B64x датащи(HTML) 18 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL