CS10.244

C-Line

Do not operate this power supply with DC-input voltage. Use the QS10.241 or CP10.241 unit instead.

A NTC inrush limitation circuit limits the input inrush current after turn-on of the input voltage.

The charging current into the EMI suppression capacitors is disregarded in the first microseconds after switch-on.

Inrush current

max.

at 230Vac, +40°C ambient, cold start

typ.

at 230Vac, +40°C ambient, cold start

Inrush energy

max.

at 230Vac, +40°C ambient, cold start

Fig. 5-1 Typical input inrush current behavior

Input:

230Vac

Output:

24V, 10A

Ambient:

+40°C

Upper curve:

Input current (20A / DIV)

Medium curve: Input voltage (200V / DIV)

Lower curve:

Output voltage (10V / DIV)

Time scale:

20ms / DIV

1 >

2 >

3

3 >

Jul. 2015 / Rev. 2.0 DS-CS10.244-EN

All parameters are specified at 24V, 10A, 230Vac, 50Hz, 25°C ambient and after a 5 minutes run-in time unless otherwise noted.

www.pulspower.com Phone +49 89 9278 0

Germany

6/24