Signal Conditioner

ZSC31014

Datasheet

© 2016 Integrated Device Technology, Inc.

2

January 20, 2016

INMUX

PreAmp

(2.7V - 5.5V)

Charge Pump

& Checksum

DSP

Core

POR/Oscillator

A

D

14-Bit ADC

I

Interface

Temperature

Reference

ZSC31014

Bsupply

Optional

Bsink

0.1µF

INT/SS

SDA/MISO

SCL/SCLK

Sensor

Diagnostics

GND

0.1µF

O

U

VBP

VBN

VSS

VDD

SDA/MISO

SCL/SCLK

INT/SS

BSINK

ZSC31014

e.g. HIH4000

ZSC31014 Block Diagram

Corporate Headquarters

6024 Silver Creek Valley Road

San Jose, CA 95138

www.IDT.com

Sales

1-800-345-7015 or 408-284-8200

Fax: 408-284-2775

www.IDT.com/go/sales

Tech Support

www.IDT.com/go/support

DISCLAIMER Integrated Device Technology, Inc. (IDT) reserves the right to modify the products and/or specifications described herein at any time, without notice, at IDT's sole discretion. Performance

specifications and operating parameters of the described products are determined in an independent state and are not guaranteed to perform the same way when installed in customer products. The

information contained herein is provided without representation or warranty of any kind, whether express or implied, including, but not limited to, the suitability of IDT's products for any particular purpose, an

implied warranty of merchantability, or non-infringement of the intellectual property rights of others. This document is presented only as a guide and does not convey any license under intellectual property

rights of IDT or any third parties.

IDT's products are not intended for use in applications involving extreme environmental conditions or in life support systems or similar devices where the failure or malfunction of an IDT product can be

reasonably expected to significantly affect the health or safety of users. Anyone using an IDT product in such a manner does so at their own risk, absent an express, written agreement by IDT.

Integrated Device Technology, IDT and the IDT logo are trademarks or registered trademarks of IDT and its subsidiaries in the United States and other countries. Other trademarks used herein are the

property of IDT or their respective third party owners. For datasheet type definitions and a glossary of common terms, visit www.idt.com/go/glossary. All contents of this document are copyright of Integrated

Device Technology, Inc. All rights reserved.

Sales Code

Description

Package

ZSC31014EAB

ZSC31014 Die — Temperature range: -40°C to +125°C

Unsawn on Wafer

ZSC31014EAC

ZSC31014 Die — Temperature range: -40°C to +125°C

Sawn on Wafer Frame

ZSC31014EAG1

ZSC31014 SOP8 (150 mil) — Temperature range: -40° to +125°C

Tube: add “-T” to sales code / Reel: add “-R”

ZSC31014KIT

ZSC31014 SSC Evaluation Kit: Communication Board, SSC Board, Sensor Replacement Board, USB Cable, 5 IC Samples

(software can downloaded on www.IDT.com/ZSC31014)

Applications:

Industrial: building automation, data

loggers, pressure meters, leak

detection monitoring

Medical: infusion pumps, blood

pressure meters, air mattresses,

apnea monitors

White Goods / Appliances: fluid

level, refrigerant

Consumer: body monitors, portable

monitors, desktop weather stations,

bathroom scales, toys/games

Differential

Signal from

Any Source

GND

0 .1 µF

VSS

BSINK

VBP

VBN

VDD

INT/SS

SDA/MISO

SCL/SCLK

ZSC31014