ams Datasheet

Page 31

[v1-02] 2016-Feb-08

Document Feedback

TCS3472 − Mechanical Data

Figure 38:

Carrier Tape and Reel Information

Notes:

1. All linear dimensions are in millimeters. Dimension tolerance is ± 0.10 mm unless otherwise noted.

2. The dimensions on this drawing are for illustrative purposes only. Dimensions of an actual carrier may vary slightly.

4. Each reel is 178 millimeters in diameter and contains 3500 parts.

5. ams packaging tape and reel conform to the requirements of EIA Standard 481-B.

6. In accordance with EIA standard, device pin 1 is located next to sprocket holes in the tape.

7. This drawing is subject to change without notice.

Mechanical Data