21

TLV376, TLV2376, TLV4376

www.ti.com

SBOS755 – OCTOBER 2016

Product Folder Links: TLV376 TLV2376 TLV4376

Submit Documentation Feedback

Copyright © 2016, Texas Instruments Incorporated

11 Device and Documentation Support

11.1 Device Support

11.1.1 Development Support

11.1.1.1 TINA-TI™ (Free Software Download)

TINA-TI™ is a simple, powerful, and easy-to-use circuit simulation program based on a SPICE engine. TINA-

TI™ is a free, fully-functional version of the TINA-TI™ software, preloaded with a library of macromodels in

addition to a range of both passive and active models. TINA-TI™ provides all the conventional dc, transient, and

frequency domain analysis of SPICE, as well as additional design capabilities.

Available as a free download from the Analog eLab Design Center, TINA-TI™ offers extensive post-processing

capability that allows users to format results in a variety of ways. Virtual instruments offer the ability to select

input waveforms and probe circuit nodes, voltages, and waveforms, creating a dynamic quick-start tool.

NOTE

These files require that either the TINA software (from DesignSoft™) or TINA-TI™

software be installed. Download the free TINA-TI™ software from the TINA-TI™ folder.

11.1.1.2 TI Precision Designs

TI Precision Designs are analog solutions created by TI’s precision analog applications experts and offer the

theory of operation, component selection, simulation, complete PCB schematic and layout, bill of materials, and

measured

performance

of

many

useful

circuits.

TI

Precision

Designs

are

available

online

at

www.ti.com/ww/en/analog/precision-designs/.

11.1.1.3 WEBENCH® Filter Designer

WEBENCH® Filter Designer is a simple, powerful, and easy-to-use active filter design program. The

WEBENCH® Filter Designer lets you create optimized filter designs using a selection of TI operational amplifiers

and passive components from TI's vendor partners.

Available as a web-based tool from the WEBENCH® Design Center, WEBENCH® Filter Designer allows you to

design, optimize, and simulate complete multistage active filter solutions within minutes.

11.2 Documentation Support

11.2.1 Related Documentation

For related documentation see the following:

•

Circuit Board Layout Techniques Application Report (SLOA089)

•

Operational amplifier gain stability, Part 3: AC gain-error analysis Application Report (SLYT383)

•

Operational amplifier gain stability, Part 2: DC gain-error analysis Application Report (SLYT374)

•

Using infinite-gain, MFB filter topology in fully differential active filters Application Report (SLYT343)

•

Op Amp Performance Analysis Application Report (SBOA054)

•

Single-Supply Operation of Operational Amplifiers Application Report (SBOA059)

•

Tuning in Amplifiers Application Report (SBOA067)

•

Shelf-Life Evaluation of Lead-Free Component Finishes Application Report (SZZA046)

•

ADS832x Low Power, 16-Bit, 500-kHz, Single/Dual Unipolar Input, Analog-to-Digital Converters With Serial

Interface (SLAS415)

•

REF50xx Low-Noise, Very Low Drift, Precision Voltage Reference (SBOS410)

•

INA163 Low-Noise, Low-Distortion Instrumentation Amplifier (SBOS177)

•

ADS7822 12-Bit, 200kHz, microPower Sampling Analog-to-Digital Converter (SBAS062)