 |
поискавой системы для электроныых деталей |
|
|
поискавой системы для электроныых деталей |
|
ADUC832 датащи(PDF) 1 Page - Analog Devices |
|
|
|||||||||||||||||||||||||||||
ADUC832 датащи(HTML) 1 Page - Analog Devices |
|
|
1 / 80 page  REV. 0 ADuC832 MicroConverter®, 12-Bit ADCs and DACs with Embedded 62 kBytes Flash MCU Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective companies. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781/329-4700 www.analog.com Fax: 781/326-8703 © Analog Devices, Inc., 2002. All rights reserved. MicroConverter is a registered trademark and QuickStart is a trademark of Analog Devices, Inc. SPI is a registered trademark of Motorola, Inc. I 2C is a registered trademark of Philips Corporation. FEATURES ANALOG I/O 8-Channel, 247 kSPS 12-Bit ADC DC Performance: 1 LSB INL AC Performance: 71 dB SNR DMA Controller for High Speed ADC-to-RAM Capture 2 12-Bit (Monotonic) Voltage Output DACs Dual Output PWM/ - DACs On-Chip Temperature Sensor Function 3 C On-Chip Voltage Reference Memory 62 kBytes On-Chip Flash/EE Program Memory 4 kBytes On-Chip Flash/EE Data Memory Flash/EE, 100 Yr Retention, 100 kCycles Endurance 2304 Bytes On-Chip Data RAM 8051-Based Core 8051 Compatible Instruction Set (16 MHz Max) 32 kHz Ext Crystal, On-Chip Programmable PLL 12 Interrupt Sources, 2 Priority Levels Dual Data Pointer Extended 11-Bit Stack Pointer On-Chip Peripherals Time Interval Counter (TIC) UART, I2C®, and SPI® Serial I/O Watchdog Timer (WDT), Power Supply Monitor (PSM) Power Specified for 3 V and 5 V Operation Normal, Idle, and Power-Down Modes Power-Down: 25 A @ 3 V with Wake-Up cct Running APPLICATIONS Optical Networking—Laser Power Control Base Station Systems Precision Instrumentation, Smart Sensors Transient Capture Systems DAS and Communications Systems Upgrade to ADuC812 Systems. Runs from 32 kHz External Crystal with On-Chip PLL. Also Available: ADuC831 Pin Compatible Upgrade to Existing ADuC812 Systems that Require Additional Code or Data Memory. Runs from 1 MHz–16 MHz External Crystal. FUNCTIONAL BLOCK DIAGRAM 62 kBYTES FLASH/EE PROGRAM MEMORY 4 kBYTES FLASH/EE DATA MEMORY 2304 BYTES USER RAM 3 16 BIT TIMERS 1 REAL TIME CLOCK 4 PARALLEL PORTS 8051-BASED MCU WITH ADDITIONAL PERIPHERALS ADuC832 XTAL2 XTAL1 TEMP SENSOR VREF INTERNAL BAND GAP VREF ADC0 ADC1 ADC5 ADC6 ADC7 OSC 12-BIT DAC DAC PWM0 T/H MUX 12-BIT ADC HARDWARE CALIBRATON BUF DAC BUF PWM1 12-BIT DAC 16-BIT – DAC 16-BIT – DAC 16-BIT PWM 16-BIT PWM POWER SUPPLY MON WATCHDOG TIMER UART, I2 C, AND SPI SERIAL I/O MUX PLL GENERAL DESCRIPTION The ADuC832 is a complete smart transducer front end, integrat- ing a high performance self-calibrating multichannel 12-bit ADC, dual 12-bit DACs, and programmable 8-bit MCU on a single chip. The device operates from a 32 kHz crystal with an on-chip PLL generating a high frequency clock of 16.77 MHz. This clock is, in turn, routed through a programmable clock divider from which the MCU core clock operating frequency is generated. The micro- controller core is an 8052 and therefore 8051 instruction set compatible with 12 core clock periods per machine cycle. 62 kBytes of nonvolatile Flash/EE program memory are provided on-chip. 4 kBytes of nonvolatile Flash/EE data memory, 256 bytes RAM, and 2 kBytes of extended RAM are also integrated on-chip. The ADuC832 also incorporates additional analog functionality with two 12-bit DACs, power supply monitor, and a band gap reference. On-chip digital peripherals include two 16-bit - DACs, dual output 16-bit PWM, watchdog timer, time interval counter, three timers/counters, Timer 3 for baud rate generation, and serial I/O ports (SPI, I 2C, and UART) On-chip factory firmware supports in-circuit serial download and debug modes (via UART) as well as single-pin emulation mode via the EA pin. The ADuC832 is supported by QuickStart™ and QuickStart Plus development systems featuring low cost software and hardware development tools. A functional block diagram of the ADuC832 is shown above with a more detailed block diagram shown in Figure 1. The part is specified for 3 V and 5 V operation over the extended industrial temperature range and is available in a 52-lead plastic quad flatpack package and a 56-lead chip scale package. |
Аналогичный номер детали - ADUC832 |
|
Аналогичное описание - ADUC832 |
|
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Russian ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
