LPC2194 datasheet(1/33 Pages) PHILIPS

номер детали	LPC2194

подробное описание детали	Single-chip 16/32-bit microcontrollers 256 kB ISP/IAP Flash with 10-bit ADC and CAN

PDF	33 Pages

Scroll/Zoom	100%

производитель	PHILIPS [NXP Semiconductors]

домашняя страница	http://www.nxp.com

Logo

1 / 33 page

LPC2194

Single-chip 16/32-bit microcontrollers; 256 kB ISP/IAP Flash

with 10-bit ADC and CAN

Rev. 01 — 06 February 2004

Preliminary data

1.

General description

The LPC2194 is based on a 16/32 bit ARM7TDMI-S™ CPU with real-time emulation

and embedded trace support, together with 256 kilobytes (kB) of embedded high

speed ﬂash memory. A 128-bit wide memory interface and a unique accelerator

architecture enable 32-bit code execution at maximum clock rate. For critical code

size applications, the alternative 16-bit Thumb Mode reduces code by more than 30%

with minimal performance penalty.

With its compact 64 pin package, low power consumption, various 32-bit timers,

4-channel 10-bit ADC, 4 advanced CAN channels, PWM channels and 46 GPIO lines

with up to 9 external interrupt pins this microcontroller is particularly suitable for

automotive applications such as a CAN gateway that connects several CAN busses

or a CAN bridge between sub networks at different speeds. Sensors with CAN

interface or debugging via CAN are additional application that need more than 2 CAN

interfaces. It is also an adequate solution for industrial control, medical systems and

fault-tolerant maintenance buses. With a wide range of additional serial

communications interfaces, it is also suited for communication gateways and protocol

converters as well as many other general-purpose applications.

2.

Features

2.1 Key features

s 16/32-bit ARM7TDMI-S microcontroller in a tiny LQFP64 package.

s 16 kB on-chip Static RAM and 256 kB on-chip Flash Program Memory. 128-bit

wide interface/accelerator enables high speed 60 MHz operation.

s In-System Programming (ISP) and In-Application Programming (IAP) via on-chip

boot-loader software. Flash programming takes 1 ms per 512 byte line. Single

sector or full chip erase takes 400 ms.

s EmbeddedICE-RT and Embedded Trace interfaces offer real-time debugging with

on-chip RealMonitor software as well as high speed real-time tracing of instruction

execution.

s Four interconnected CAN interfaces with advanced acceptance ﬁlters. Additional

serial interfaces are two UARTs (16C550), Fast I2C (400 kbits/s) and two SPIs™.

s Four channel 10-bit A/D converter with conversion time as low as 2.44

µs.

s Two 32-bit timers (with 4 capture and 4 compare channels), PWM unit (6 outputs),

Real Time Clock and Watchdog.

s Vectored Interrupt Controller with conﬁgurable priorities and vector addresses.

s Up to forty-six 5 V tolerant general purpose I/O pins. Up to 9 edge or level

sensitive external interrupt pins available.

s Operating temperature range from

−40 °C to +105 °C.

Аналогичный номер детали - LPC2194

производитель	номер детали	датащи	подробное описание детали
NXP Semiconductors	LPC2194	188Kb / 40P	Single-chip 16/32-bit microcontroller; 256 kB ISP/IAP flash with 10-bit ADC and CAN Rev. 05-10 December 2007
	LPC2194	222Kb / 41P	Single-chip 16/32-bit microcontroller; 256 kB ISP/IAP flash with 10-bit ADC and CAN Rev. 6 ??14 June 2011
	LPC2194HBD64	188Kb / 40P	Single-chip 16/32-bit microcontroller; 256 kB ISP/IAP flash with 10-bit ADC and CAN Rev. 05-10 December 2007
	LPC2194HBD64	222Kb / 41P	Single-chip 16/32-bit microcontroller; 256 kB ISP/IAP flash with 10-bit ADC and CAN Rev. 6 ??14 June 2011
	LPC2194HBD64/00	188Kb / 40P	Single-chip 16/32-bit microcontroller; 256 kB ISP/IAP flash with 10-bit ADC and CAN Rev. 05-10 December 2007

More results

Аналогичное описание - LPC2194

производитель	номер детали	датащи	подробное описание детали
NXP Semiconductors	LPC2119	163Kb / 34P	Single-chip 16/32-bit microcontrollers; 128/256 kB ISP/IAP Flash with 10-bit ADC and CAN Rev. 03-22 December 2004
	LPC2114	161Kb / 34P	Single-chip 16/32-bit microcontrollers; 128/256 kB ISP/IAP Flash with 10-bit ADC Rev. 03-22 December 2004
	LPC2109	194Kb / 44P	Single-chip 16/32-bit microcontrollers; 64/128/256 kB ISP/IAP flash with 10-bit ADC and CAN Rev. 06-10 December 2007
	LPC2114	182Kb / 40P	Single-chip 16/32-bit microcontrollers; 128/256 kB ISP/IAP flash with 10-bit ADC Rev. 06-10 December 2007
	LPC2194	188Kb / 40P	Single-chip 16/32-bit microcontroller; 256 kB ISP/IAP flash with 10-bit ADC and CAN Rev. 05-10 December 2007
	LPC2109	298Kb / 46P	Single-chip 16/32-bit microcontrollers; 64/128/256 kB ISP/IAP flash with 10-bit ADC and CAN Rev. 7-14 June 2011
	LPC2114	309Kb / 42P	Single-chip 16/32-bit microcontrollers; 128/256 kB ISP/IAP flash with 10-bit ADC Rev. 7-10 June 2011
	LPC2109	298Kb / 46P	Single-chip 16/32-bit microcontrollers; 64/128/256 kB ISP/IAP flash with 10-bit ADC and CAN Rev. 7-14 June 2011
	LPC2114	309Kb / 42P	Single-chip 16/32-bit microcontrollers; 128/256 kB ISP/IAP flash with 10-bit ADC Rev. 7-10 June 2011
	LPC2194	222Kb / 41P	Single-chip 16/32-bit microcontroller; 256 kB ISP/IAP flash with 10-bit ADC and CAN Rev. 6 ??14 June 2011

More results

LPC2194 датащи(PDF) 1 Page - NXP Semiconductors

LPC2194 датащи(HTML) 1 Page - NXP Semiconductors

Аналогичный номер детали - LPC2194

Аналогичное описание - LPC2194

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33

датащи скачать

ссылки URL