AR0230CS datasheet(13/33 Pages) ONSEMI

13 / 33 page

AR0230CS/D Rev. 9, 6/16 EN

©Semiconductor Components Industries, LLC,2016.

AR0230CS: 1/2.7-Inch 2.1 Mp/Full HD Digital Image Sensor

Features Overview

For a complete description, recommendations, and usage guidelines for product

features, refer to the AR0230CS Developer Guide.

3.0m Dual Conversion Gain Pixel

To improve the low light performance and keep the high dynamic range, a large (3.0um)

dual conversion gain pixel is implemented for better image optimization. With a dual

conversion gain pixel, the conversion gain of the pixel may be dynamically changed to

better adapt the pixel response based on dynamic range of the scene. This gain can be

switched manually or automatically by an auto exposure control module.

HDR

By default, the sensor powers up in HDR Mode. The HDR scheme used is multi-exposure

HDR. This allows the sensor to handle up to 96 dB of dynamic range. In HDR mode, the

sensor sequentially captures two exposures by maintaining two separate read and reset

pointers that are interleaved within the rolling shutter readout. The intermediate pixel

values are stored in line buffers while waiting for the two exposure values to be present.

As soon as a pixel's two exposure values are available, they are combined to create a

linearized 16-bit value for each pixel's response. The exposure ratio may be set to 4x, 8x,

16x, or 32x. Depending on whether HiSPi or Parallel mode is selected, the full 16 bit value

may be output, it can be compressed to 12 bits using Adaptive Local Tone Mapping

(ALTM), or companded to 12 or 14 bits.

Options to output T1 only, T2 only, or pixel interleaved data are also available. Individual

exposures may be read out in a line interleaved mode as described in the T1/T2 Line

Interleaved Mode section.

Resolution

The active array supports a maximum of 1928x1088 pixels to support 1080p resolution.

Utilizing a 3.0um pixel will result in an optical format of 1/2.7-inch (approximately

6.6mm diagonal).

Frame Rate

At full (1080p) resolution, the AR0230CS is capable of running up to 3060 fps.

Image Acquisition Mode

The AR0230CS supports two image acquisition modes:

• Electronic rolling shutter (ERS) mode

This is the normal mode of operation. When the AR0230CS is streaming, it generates

frames at a fixed rate, and each frame is integrated (exposed) using the ERS. When ERS

mode is in use, timing and control logic within the sensor sequences through the rows of

the array, resetting and then reading each row in turn. In the time interval between reset-

ting a row and subsequently reading that row, the pixels in the row integrate incident

light. The integration (exposure) time is controlled by varying the time between row

reset and row readout. For each row in a frame, the time between row reset and row

readout is the same, leading to a uniform integration time across the frame. When the

integration time is changed (by using the two-wire serial interface to change register

settings), the timing and control logic controls the transition from old to new integration

AR0230CS датащи(PDF) 13 Page - ON Semiconductor

AR0230CS датащи(HTML) 13 Page - ON Semiconductor

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33

датащи скачать

ссылки URL