MCP1804_13 datasheet(3/36 Pages) MICROCHIP

3 / 36 page

 2009-2013 Microchip Technology Inc.

DS20002200D-page 3

MCP1804

1.0

ELECTRICAL

CHARACTERISTICS

Absolute Maximum Ratings †

Input Voltage ........................................................................................................................................................... +30V

Output Current (Continuous)............................................................................................................. PD/(VIN -VOUT) mA

Output Current (Peak).......................................................................................................................................... 300 mA

Output Voltage ...................................................................................................................... (VSS - 0.3V) to (VIN +0.3V)

SHDN Voltage .................................................................................................................................. (VSS - 0.3V) to +30V

† Notice: Stresses above those listed under “Maximum

Ratings” may cause permanent damage to the device.

This is a stress rating only and functional operation of

the device at those or any other conditions above those

indicated in the operational listings of this specification

is not implied. Exposure to maximum rating conditions

for extended periods may affect device reliability.

ELECTRICAL CHARACTERISTICS

Electrical Specifications: Unless otherwise specified, all limits are established for VIN =VR +2.0V, Note 1,

COUT = 1 µF (X7R), CIN = 1 µF (X7R), VSHDN =VIN, TA =+25°C

Parameters

Sym.

Min.

Typ.

Max.

Units

Conditions

Input / Output Characteristics

Input Operating

Voltage

VIN

2.0

—

28.0

Note 1

Input Quiescent

Current

—IL =0mA

—50

105

µA

1.8V

 VOUT  5.0V

—

115

µA

5.1V

 VOUT  12.0V

—

125

µA

12.1V

 VOUT  18.0V

Shutdown Current

ISHDN

—

0.01

0.10

µA

SHDN =0V

Maximum Output

Current

IOUT

—VIN =VR +3.0V

100

—

VOUT <3.0V

150

—

VOUT  3.0V

Current Limiter

ILIMIT

—

200

—

Output Short Circuit

Current

IOUT_SC

—40

—

Output Voltage

Regulation

VOUT

VR -2.0%

VR +2.0%

IOUT =10 mA, Note 2

VOUT Temperature

Coefficient

TCVOUT

—

±100

—

ppm/°C

IOUT =20 mA,

-40°C

 TA 85°C, Note 3

Note 1:

The minimum VIN must meet one condition: VIN  (VR +2.0V).

VR is the nominal regulator output voltage with an input voltage of VIN =VR +2.0V.

For example: VR = 1.8V, 2.5V, 3.0V, 3.3V, etc.

TCVOUT =(VOUT-HIGH -VOUT-LOW)*106 / (VR * Temperature), VOUT-HIGH = highest voltage measured

over the temperature range. VOUT-LOW = lowest voltage measured over the temperature range.

Load regulation is measured at a constant junction temperature using low duty cycle pulse testing.

Changes in output voltage due to heating effects are determined using thermal regulation specification

TCVOUT.

Dropout voltage is defined as the input to output differential at which the output voltage drops 2% below its

measured value with an applied input voltage of VR +2.0V.

MCP1804 датащи(PDF) 3 Page - Microchip Technology

MCP1804 датащи(HTML) 3 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36

датащи скачать

ссылки URL