| поискавой системы для электроныых деталей |
|
STM32L162VD датащи(PDF) 84 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STM32L162VD датащи(HTML) 84 Page - STMicroelectronics |
|
84 / 115 page ![]() Electrical characteristics STM32L162VD-X 84/115 DocID027268 Rev 3 Output driving current The GPIOs (general purpose input/outputs) can sink or source up to ±8 mA, and sink or source up to ±20 mA with the non-standard VOL/VOH specifications given in Table 42. In the user application, the number of I/O pins which can drive current must be limited to respect the absolute maximum rating specified in Section 6.2: • The sum of the currents sourced by all the I/Os on VDD, plus the maximum Run consumption of the MCU sourced on VDD, cannot exceed the absolute maximum rating IVDD(Σ) (see Table 10). • The sum of the currents sunk by all the I/Os on VSS plus the maximum Run consumption of the MCU sunk on VSS cannot exceed the absolute maximum rating IVSS(Σ) (see Table 10). Output voltage levels Unless otherwise specified, the parameters given in Table 42 are derived from tests performed under the conditions summarized in Table 12. All I/Os are CMOS and TTL compliant. Table 42. Output voltage characteristics Symbol Parameter Conditions Min Max Unit VOL(1)(2) 1. The IIO current sunk by the device must always respect the absolute maximum rating specified in Table 10 and the sum of IIO (I/O ports and control pins) must not exceed IVSS. 2. Guaranteed by test in production. Output low level voltage for an I/O pin IIO = 8 mA 2.7 V < VDD < 3.6 V -0.4 V VOH(2)(3) 3. The IIO current sourced by the device must always respect the absolute maximum rating specified in Table 10 and the sum of IIO (I/O ports and control pins) must not exceed IVDD. Output high level voltage for an I/O pin VDD-0.4 - VOL (3)(4) Output low level voltage for an I/O pin IIO = 4 mA 1.65 V < VDD < 3.6 V -0.45 VOH (3)(4) Output high level voltage for an I/O pin VDD-0.45 - VOL(1)(4) 4. Guaranteed by characterization results. Output low level voltage for an I/O pin IIO = 20 mA 2.7 V < VDD < 3.6 V -1.3 VOH(3)(4) Output high level voltage for an I/O pin VDD-1.3 - |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |