USB4624 datasheet(12/58 Pages) MICROCHIP

12 / 58 page

USB 2.0 HSIC Hi-Speed 4-Port Hub Controller

Datasheet

DS00001717A-page 12

 2014 Microchip Technology Inc.

3.1

Pin Descriptions

This section provides a detailed description of each pin. The signals are arranged in functional groups

according to their associated interface.

The “_N” symbol in the signal name indicates that the active, or asserted, state occurs when the signal

is at a low voltage level. For example, RESET_N indicates that the reset signal is active low. When

“_N” is not present after the signal name, the signal is asserted when at the high voltage level.

The terms assertion and negation are used exclusively. This is done to avoid confusion when working

with a mixture of “active low” and “active high” signals. The term assert, or assertion, indicates that a

signal is active, independent of whether that level is represented by a high or low voltage. The term

negate, or negation, indicates that a signal is inactive.

Note: The buffer type for each signal is indicated in the BUFFER TYPE column of Table 3.1. A

description of the buffer types is provided in Section 3.3.

Table 3.1 Pin Descriptions

NUM PINS

NAME

SYMBOL

BUFFER

TYPE

DESCRIPTION

USB/HSIC INTERFACES

Upstream

USB D+

(Flex Port 0)

FLEX_USBUP_DP

AIO

Upstream USB Port 0 D+ data signal.

See Note 3.2.

Note:

The upstream Port 0 signals can be

optionally swapped with the

downstream Port 1 signals.

Port 0 D+

Disable

Configuration

Strap

PRT_DIS_P0

This strap is used in conjunction with

PRT_DIS_M0 to disable USB Port 0.

0 = Port 0 D+ Enabled

1 = Port 0 D+ Disabled

Note:

Both PRT_DIS_P0 and PRT_DIS_M0

must be tied to VDD33 at reset to place

Port 0 into HSIC mode.

See Note 3.3 for more information on

configuration straps.

Upstream

USB D-

(Flex Port 0)

FLEX_USBUP_DM

AIO

Upstream USB Port 0 D- data signal.

See Note 3.2.

Note:

The upstream Port 0 signals can be

optionally swapped with the

downstream Port 1 signals.

Port 0 D-

Disable

Configuration

Strap

PRT_DIS_M0

This strap is used in conjunction with

PRT_DIS_P0 to disable USB Port 0.

0 = Port 0 D- Enabled

1 = Port 0 D- Disabled

Note:

Both PRT_DIS_P0 and PRT_DIS_M0

must be tied to VDD33 at reset to place

Port 0 into HSIC mode.

See Note 3.3 for more information on

configuration straps.

USB4624 датащи(PDF) 12 Page - Microchip Technology

USB4624 датащи(HTML) 12 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58

датащи скачать

ссылки URL