Freescale USB Development Board USB-KW40Z User’s Guide, Rev. 0, 10/2015

Freescale Semiconductor, Inc

5

USB-KW40Z overview and description

The USB-KW40Z development board includes the following features:

•

Based on the Freescale ultra low-power MKW40Z160 SoC BLE device

•

Fully compliant IEEE Std. 802.15.4, 2006, transceiver supporting 250 kbit/s O-QPSK data in

5.0 MHz channels and full spread-spectrum encode and decode

•

Fully compliant Bluetooth v4.1 Low Energy (BLE)

•

Full IEEE 802.15.4 compliant wireless node with KSDK enable software

•

Reference design area with small footprint, low-cost RF node

— Differential input/output port used with external balun for single port operation

— Low external component count

— Programmable output power from –20 dBm to +5 dBm at the MMCX connector, no harmonic

trap using bypass mode of operation

— Receiver sensitivity: –102 dBm, typical (@1% PER for 20 byte payload packet), for 802.15.4

at the MMCX connector

— Receiver sensitivity: -91 dBm for BLE applications at the MMCX connector

•

Integrated PCB inverted meander type antenna and MMCX (Micro-Miniature Coaxial) RF port

•

Bypass operation mode

•

32 MHz reference oscillator

•

32 kHz reference oscillator

•

2.4 GHz frequency operation (ISM and MBAN)

•

•

Reset switch drive to debug interface (OpenSDA)

•

Cortex 10-pin (0.05 inch) SWD debug port for target MCU

•

Cortex 10-pin (0.05 inch) JTAG port for OpenSDA updates

•

Integrated open-standard serial and debug interface (OpenSDA)

•

2 Blue LED indicators primary drive thought MKW40Z160 MCU, also connected to MK22FN512

•

1 Push button switch drive to MKW40Z160 MCU, also connected to MK22FN512