Rev. 0.7 3/15

Copyright © 2015 by Silicon Laboratories

Si7013USB-DONGLE

Si7013USB-DONGLE

1. Introduction

This user’s guide describes the evaluation GUI and PCB board design for the following evaluation kits:

2. Evaluation Kit Descriptions

All of the supported evaluation kits contain the following items:

circuitry for evaluation of the Si7013 with thermistor or other analog input

VISTA, or 7 required)

Depending on the kit, different postage stamp boards are supplied as well.

postage stamp.

Using the Si7013 USB-dongle, the Windows GUI will also support “postage stamp” size boards for the Si7005

first-generation temperature and humidity sensor in a 4x4 mm package (Si7005-EB) as well as the Si7015

pin-compatible upgrade of this part (Si7015-EB).

The Windows* GUI will also support the older version Si7005USB-dongle although not all features of the newer

parts can be evaluated in this case.

*Note: Windows is a registered trademark of Microsoft Corporation in the United States and other countries.

Figure 1. Si7013USB-DONGLE