LM76 datasheet(3/22 Pages) TI

3 / 22 page

LM76

www.ti.com

SNIS109E – JANUARY 2000 – REVISED MARCH 2013

These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam

during storage or handling to prevent electrostatic damage to the MOS gates.

Absolute Maximum Ratings

(1)

Supply Voltage

−0.3V to 6.5V

Voltage at any Pin

−0.3V to (+VS + 0.3V)

Input Current at any Pin

5mA

Package Input Current(2)

20mA

T_CRIT_A and

INT Output Sink Current

10mA

T_CRIT_A and

INT Output Voltage

6.5V

Storage Temperature

−65°C to +125°C

Soldering Information, Lead Temperature

SOIC Package(3)

Vapor Phase (60 seconds)

215°C

Infrared (15 seconds)

220°C

ESD Susceptibility (4)

Human Body Model

3000V

Machine Model

250V

(1)

Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. DC and AC electrical specifications do not

apply when operating the device beyond its rated operating conditions.

(2)

When the input voltage (VI) at any pin exceeds the power supplies (VI < GND or VI > +VS) the current at that pin should be limited to 5

mA. The 20 mA maximum package input current rating limits the number of pins that can safely exceed the power supplies with an input

current of 5 mA to four.

(3)

See AN-450 “Surface Mounting Methods and Their Effect on Product Reliability” or the section titled “Surface Mount” found in a current

Texas Instruments Linear Data Book for other methods of soldering surface mount devices.

(4)

Human body model, 100 pF discharged through a 1.5 k

Ω resistor. Machine model, 200 pF discharged directly into each pin.

Operating Ratings

(1) (2)

Operating Temperature Range

−55°C to +150°C

Specified Temperature Range(3)

TMIN to TMAX

LM76CHM-5

−20°C to +85°C

Supply Voltage Range (+VS)

(4)

+4.5V to +5.5V

(1)

Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. DC and AC electrical specifications do not

apply when operating the device beyond its rated operating conditions.

(2)

LM76

θJA (thermal resistance, junction-to-ambient) when attached to a printed circuit board with 2 oz. foil is 200°C/W.

(3)

While the LM76 has a full-scale-range in excess of 128°C, prolonged operation at temperatures above 125°C is not recommended.

(4)

The LM76 will operate properly over the +VS supply voltage range of 3V to 5.5V for the LM76CNM-3 and the LM76CHM-5. The

LM76CNM-3 is tested and specified for rated accuracy at the nominal supply voltage of 3.3V. Accuracy of the LM76CNM-3 will degrade

0.2°C for a ±1% variation in +VS from the nominal value. The LM76CHM-5 is tested and specified for a rated accuracy at the nominal

supply voltage of 5.0V. Accuracy of the LM76CHM-5 will degrade 0.08°C for a ±1% variation in +VS from the nominal value.

Submit Documentation Feedback

Product Folder Links: LM76

LM76 датащи(PDF) 3 Page - Texas Instruments

LM76 датащи(HTML) 3 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

датащи скачать

ссылки URL