| поискавой системы для электроныых деталей |
|
DTO25 датащи(PDF) 3 Page - Vishay Siliconix |
|
|
|||||||||||||||||||||||||||||
DTO25 датащи(HTML) 3 Page - Vishay Siliconix |
|
3 / 6 page ![]() DTO25 www.vishay.com Vishay Sfernice Revision: 23-Sep-15 3 Document Number: 51054 For technical questions, contact: sferfixedresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 POWER RATING The temperature of the case should be maintained within the limits specified. CHOICE OF THE BOARD The user must choose the board according to the working conditions of the component (power, room temperature). Maximum working temperature must not exceed 150 °C. The dissipated power is simply calculated by the following ratio: P: Expressed in W ΔT: Difference between maximum working temperature and room temperature RTH (j - c): Thermal resistance value measured between resistive layer and outer side of the resistor. It is the thermal resistance of the component: 5 °C/W. RTH (c - h): Thermal resistance value measured between outer side of the resistor and upper side of the board. This is the thermal resistance of the solder layer. RTH (h - a): Thermal resistance of the board. Example: RTH (c - h) + RTH (h - a) for DTO25 power rating 3 W at ambient temperature +25 °C. Thermal resistance RTH (j - c): 5 °C/W Considering equation (1) we have: ΔT = 150 °C - 25 °C = 125 °C RTH (j - c) + RTH (c - h) + RTH (h - a) = ΔT/P = 125/3 = 41.7 °C/W RTH (c - h) + RTH (h - a) = 41.7 °C/W - 5 °C/W = 36.7 °C/W ACCIDENTAL OVERLOAD In any case the applied voltage must be lower than the maximum overload voltage of Us = 300 V. The values indicated on the graph below are applicable to resistors onto a board. ENERGY CURVE at 25 °C POWER CURVE at 25 °C 50 25 0 100 CASE TEMPERATURE IN °C 80 60 40 20 0 100 150 200 P ΔT R TH (j - c) R TH (c - h) R TH (h - a) ++ ------------------------------------------------------------------------------------------- 1 () = 0.001 0.01 0.1 1 10 100 OVERLOAD DURATION IN s 10 -7 10 -6 10 -5 10 -4 10 -3 10 -2 10 -1 OVERLOAD DURATION IN s 10 -7 10 -6 10 -5 10 -4 10 -3 10 -2 10 -1 10 1000 10 000 100 000 100 |
|
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |