9

All Intersil U.S. products are manufactured, assembled and tested utilizing ISO9001 quality systems.

Intersil Corporation’s quality certifications can be viewed at www.intersil.com/design/quality

Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without

notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and

reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result

from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.

For information regarding Intersil Corporation and its products, see www.intersil.com

FN3976.4

September 17, 2015

About Intersil

Intersil Corporation is a leading provider of innovative power management and precision analog solutions. The company's products

address some of the largest markets within the industrial and infrastructure, mobile computing and high-end consumer markets.

For the most updated datasheet, application notes, related documentation and related parts, please see the respective product

information page found at www.intersil.com.

You may report errors or suggestions for improving this datasheet by visiting www.intersil.com/ask.

Reliability reports are also available from our website at www.intersil.com/support.

Revision History

The revision history provided is for informational purposes only and is believed to be accurate, but not warranted. Please go to the web to make

sure that you have the latest revision

.

DATE

REVISION

CHANGE

September 17, 2015

FN3976.4

- Updated Ordering Information Table on page 1.

- Added Revision History.

- Added About Intersil Verbiage.

- Updated POD M20.3 to latest revision changes are as follow:

Top View:

Corrected "7.50 BSC" to "7.60/7.40" (no change from rev 2; error was introduced in conversion)

Changed "10.30 BSC" to "10.65/10.00" (no change from rev 2; error was introduced in conversion)

Side View:

Changed "12.80 BSC" to "13.00/12.60" (no change from rev 2; error was introduced in conversion)

Changed "2.65 max" to "2.65/2.35" (no change from rev 2; error was introduced in conversion)

Changed Note 1 from "ANSI Y14.5M-1982." to "ASME Y14.5M-1994"

HIP4020