IRFS7430PBF datasheet(2/12 Pages) IRF

2 / 12 page

IRFS/SL7430PbF

Submit Datasheet Feedback

November 6, 2014

Notes:

Calculated continuous current based on maximum allowable junction

temperature. Bond wire current limit is 195A. Note that current

limitations arising from heating of the device leads may occur with

some lead mounting arrangements.

(Refer to AN-1140)

Repetitive rating; pulse width limited by max. junction

temperature.

Limited by TJmax, starting TJ = 25°C, L = 0.15mH

RG = 50

Ω, IAS = 100A, VGS =10V.

ISD ≤ 100A, di/dt ≤ 990A/μs, VDD ≤ V(BR)DSS, TJ ≤ 175°C.

Pulse width ≤ 400μs; duty cycle ≤ 2%.

Coss eff. (TR) is a fixed capacitance that gives the same charging time

as Coss while VDS is rising from 0 to 80% VDSS.

Coss eff. (ER) is a fixed capacitance that gives the same energy as

Coss while VDS is rising from 0 to 80% VDSS.

Rθ is measured at TJ approximately 90°C..

Limited by TJmax starting TJ = 25°C, L= 1mH, RG = 50Ω, IAS = 54A, VGS =10V.

When mounted on 1" square PCB (FR-4 or G-10 Material). For recom-

mended footprint and soldering techniques refer to application note #AN-994.

http://www.irf.com/technical-info/appnotes/an-994.pdf

Absolute Maximum Ratings

Symbol

Parameter

Units

ID @ TC = 25°C

Continuous Drain Current, VGS @ 10V (Silicon Limited)

ID @ TC = 100°C

Continuous Drain Current, VGS @ 10V (Silicon Limited)

ID @ TC = 25°C

Continuous Drain Current, VGS @ 10V (Wire Bond Limited)

IDM

Pulsed Drain Current

PD @TC = 25°C

Maximum Power Dissipation

Linear Derating Factor

W/°C

VGS

Gate-to-Source Voltage

Operating Junction and

TSTG

Storage Temperature Range

Soldering Temperature, for 10 seconds (1.6mm from case)

Avalanche Characteristics

EAS (Thermally limited)

Single Pulse Avalanche Energy

EAS (Thermally limited)

Single Pulse Avalanche Energy

IAR

Avalanche Current

Ãd

EAR

Repetitive Avalanche Energy

Thermal Resistance

Symbol

Parameter

Typ.

Max.

Units

RθJC

Junction-to-Case

–––

0.40

RθJA

Junction-to-Ambient (PCB Mount, steady-state)

–––

°C/W

°C

300

760

See Fig. 15, 16, 22a, 22b

375

Max.

426

301

1524

195

1452

-55 to + 175

± 20

2.5

Static @ TJ = 25°C (unless otherwise specified)

Symbol

Parameter

Min.

Typ.

Max.

Units

V(BR)DSS

Drain-to-Source Breakdown Voltage

–––

ΔV(BR)DSS/ΔTJ

Breakdown Voltage Temp. Coefficient

–––

0.014

–––

V/°C

–––

0.97

1.2

–––

1.2

–––

VGS = 6.0V, ID = 50A g

VGS(th)

Gate Threshold Voltage

2.2

–––

3.9

IDSS

Drain-to-Source Leakage Current

–––

1.0

μA

–––

150

IGSS

Gate-to-Source Forward Leakage

–––

100

Gate-to-Source Reverse Leakage

–––

-100

Internal Gate Resistance

–––

2.1

–––

RDS(on)

VGS = 10V, ID = 100A g

Conditions

VGS = 0V, ID = 250μA

Reference to 25°C, ID = 1.0mA

VDS = VGS, ID = 250μA

Static Drain-to-Source On-Resistance

VGS = 20V

VGS = -20V

VDS = 40V, VGS = 0V

VDS = 40V, VGS = 0V, TJ = 125°C

IRFS7430PBF датащи(PDF) 2 Page - International Rectifier

IRFS7430PBF датащи(HTML) 2 Page - International Rectifier

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12

датащи скачать

ссылки URL