| поискавой системы для электроныых деталей |
|
UM1865 датащи(PDF) 20 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
UM1865 датащи(HTML) 20 Page - STMicroelectronics |
|
20 / 132 page ![]() Vendor specific commands UM1865 20/132 DocID027514 Rev 1 4.2.6 Evt_Blue_L2CAP_Procedure_Timeout This event is generated when the master does not respond to the connection update request packet with a connection update response packet or a command reject packet within 30 seconds. 4.2.7 Evt_Blue_L2CAP_Connection_Update_Request The event is given by the L2CAP layer when a connection update request is received from the slave. The upper layer which receives this event has to respond by sending a Aci_L2CAP_Connection_Update_Resp command to the BlueNRG-MS. Table 14. Evt_Blue_L2CAP_Connection_Update_Resp Parameter Size Description Event code 2 bytes The event code for connection update response event Connection handle 2 bytes Connection handle for which the command is given Datalen 1 byte Length of the data to follow Data Datalen bytes Contains: (data is in the form described in Bluetooth Core v4.1 vol 3, Part A, ch. 4.1 and ch. 4.21) 1. command reject packet if the request was rejected by the master or 2. connection update response packet Table 15. Evt_Blue_L2CAP_Procedure_Timeout Parameter Size Description Event code 2 bytes The event code for L2CAP procedure timeout event Datalen 1 byte Length of the data to follow Data Datalen bytes Status (0x0000: Success) Table 16. Evt_Blue_L2CAP_Connection_Update_Request Parameter Size Description Event code 2 bytes The event code for connection update request event. Conn_Handle 2 bytes Handle of the connection for which the connection update request has been received. The same handle has to be returned while responding to the event with the command Aci_L2CAP_Connection_Update_Resp. DataLen 1 byte Length of the data to follow. The data will be the L2CAP connection update request received. Identifier 1 byte This is the identifier which associates the request to the response. The same identifier has to be returned by the upper layer in the command Aci_L2CAP_Connection_Update_Resp. Length 2 bytes Length of the L2CAP connection update request |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |