AN4488 datasheet(32/44 Pages) STMICROELECTRONICS

номер детали	AN4488

подробное описание детали	Getting started with STM32F4xxxx MCU hardware development

PDF	44 Pages

Scroll/Zoom	100%

производитель	STMICROELECTRONICS [STMicroelectronics]

домашняя страница	http://www.st.com

Logo

32 / 44 page

Debug management

AN4488

32/44

DocID026304 Rev 3

Debug management

6.1

Introduction

The Host/Target interface is the hardware equipment that connects the host to the

application board. This interface is made of three components: a hardware debug tool, a

JTAG or SW connector and a cable connecting the host to the debug tool.

Figure 23 shows the connection of the host to the evaluation board.

Figure 23. Host-to-board connection

6.2

SWJ debug port (serial wire and JTAG)

The STM32F4xxxx core integrates the serial wire / JTAG debug port (SWJ-DP). It is an

ARM® standard CoreSight™ debug port that combines a JTAG-DP (5-pin) interface and a

SW-DP (2-pin) interface.

•

The JTAG debug port (JTAG-DP) provides a 5-pin standard JTAG interface to the AHP-

AP port

•

The serial wire debug port (SW-DP) provides a 2-pin (clock + data) interface to the

AHP-AP port

In the SWJ-DP, the two JTAG pins of the SW-DP are multiplexed with some of the five JTAG

pins of the JTAG-DP.

6.3

Pinout and debug port pins

The STM32F4xxxx MCU is offered in various packages with different numbers of available

pins. As a result, some functionality related to the pin availability may differ from one

package to another.

6.3.1

SWJ debug port pins

Five pins are used as outputs for the SWJ-DP as alternate functions of general-purpose

I/Os (GPIOs). These pins, shown in Table 8, are available on all packages.

AN4488 датащи(PDF) 32 Page - STMicroelectronics