HT47C20L datasheet(13/55 Pages) HOLTEK

13 / 55 page

HT47C20L

January 18, 2000

Labels

Bits

Function

C is set if the operation results in a carry during an addition operation or if a bor-

row does not take place during a subtraction operation; otherwise C is cleared. C

is also affected by a rotate through carry instruction.

AC is set if the operation results in a carry out of the low nibbles in addition or no

borrow from the high nibble into the low nibble in subtraction; otherwise AC is

cleared.

Z is set if the result of an arithmetic or logic operation is zero; otherwise Z is

cleared.

OV is set if the operation results in a carry into the highest-order bit but not a

carry out of the highest-order bit, or vice versa; otherwise OV is cleared.

PD is cleared when either a system power-up or executing the CLR WDT in-

struction. PD is set by executing the HALT instruction.

TO is cleared by a system power-up or executing the CLR WDT or HALT in-

struction. TO is set by a WDT time-out.

Undefined, read as ²0²

STATUS register

Arithmetic and logic unit - ALU

This circuit performs 8-bit arithmetic and logic

operation. The ALU provides the following

functions:

· Arithmetic operations (ADD, ADC, SUB,

SBC, DAA)

· Logic operations (AND, OR, XOR, CPL)

· Rotation (RL, RR, RLC, RRC)

· Increment and Decrement (INC, DEC)

· Branch decision (SZ, SNZ, SIZ, SDZ ....)

The ALU not only saves the results of a data op-

eration but can change the status register.

Status register - STATUS

This 8-bit register (0AH) contains the zero flag

(Z), carry flag (C), auxiliary carry flag (AC), over-

flow flag (OV), power down flag (PD) and watch-

dog time-out flag (TO). It also records the status

information and controls the operation sequence.

With the exception of the TO and PD flags,

bits in the status register can be altered by

instructions like most other registers. Any

data written into the status register will not

change the TO or PD flags. In addition it

should be noted that operations related to

the status register may give different results

from those intended. The TO and PD flags

can only be changed by the watchdog timer

overflow, system power-up, clearing the

watchdog timer and executing the HALT in-

struction.

The Z, OV, AC and C flags generally reflect the

status of the latest operations.

In addition, on entering the interrupt sequence

or executing the subroutine call, the status reg-

ister will not be automatically pushed onto the

stack. If the contents of status are important

and if the subroutine can corrupt the status

properly.

Interrupts

The HT47C20L provides an external interrupt,

an internal timer/event counter interrupt, an

internal time base interrupt, and an internal

real time clock interrupt. The interrupt control

rupt control bits to set the enable/disable and

interrupt request flags.

HT47C20L датащи(PDF) 13 Page - Holtek Semiconductor Inc

HT47C20L датащи(HTML) 13 Page - Holtek Semiconductor Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55

датащи скачать

ссылки URL