Wall Industries, Inc.

Rev B

PSPRL0801 SERIES

150~300 Watts, AC/DC Switching Power Supplies

09/05/2014

Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797

website: www.wallindustries.com • e-mail: sales@wallindustries.com

Page 1 of 5

U-Chassis

U-Chassis with Vented Top Cover

Enclosed with End-Side Built-in Fan

Enclosed with Top-Side Built-in Fan

FEATURES

DESCRIPTION

The PSPRL0801 series of AC/DC switching power supplies offers up to 150 Watts of output power with convection cooling and up to 300 Watts with 25CFM

forced airflow. This series consists of single output models ranging from 2VDC to 60VDC. These models have a 90~264VAC input voltage range, active PFC

corrected to EN61000-3-2 Class D, and built-in remote on/off, power good, and fan fail alarm functions. These supplies are also protected against short circuit,

over voltage, over power, and over temperature conditions. Models are available in U-chassis (Type U), U-chassis with vented top cover (Type C), enclosed

with end-side built-in fan (Type E), and enclosed with top-side built-in fan (Type F) designs. This series is RoHS compliant and has UL60950-1, EN60950-1, and

IEC60950-1 safety approvals.

MODEL SELECTION TABLE

Input Voltage

Range

Preset

Type U

(Convection)

Types U, C, E, & F

(25CFM Forced Air)

Type U

(Convection)

Types U, C, E, & F

(25 CFM Forced Air)

2 ~ 5 VDC

5 VDC

20A

42A

100W

210W

1%

7 ~ 11 VDC

9 VDC

13.64A

27.27A

122.8W

245.4W

1%

12 ~ 13.8 VDC

12 VDC

12.5A

25A

150W

300W

1%

14 ~ 16 VDC

15 VDC

10A

20A

150W

300W

1%

17 ~ 22 VDC

18 VDC

8.333A

16.667

150W

300W

1%

23 ~ 28 VDC

24 VDC

6.25A

12.5A

150W

300W

1%

29 ~ 34 VDC

30 VDC

5A

10A

150W

300W

1%

35 ~ 43 VDC

36 VDC

4.167A

8.333A

150W

300W

1%

44 ~ 52 VDC

48 VDC

3.125A

6.25A

150W

300W

1%

90 - 264 VAC

53 ~ 60 VDC

54 VDC

2.778A

5.556A

150W

300W

1%

NOTES

for enclosed with top-side built-in fan.

2. All output ranges are covered by agency certifications and the preset voltage will be set as standard models if nothing different is requested. If desired

preset output does not appear, please contact factory.

3. PSPRL0801U-XX Models (U-chassis): 150W max. with convection cooling and 300W max. with 25CFM minimum forced airflow.

PSPRL0801C-XX Models

(U-chassis with vented top cover): 150W max. with convection cooling and 300W max. with 25CFM minimum forced airflow.

PSPRL0801E-XX Models

(Enclosed with end-side built-in fan): 300W max. with built-in fan airflow.

PSPRL0801F-XX Models

(Enclosed with top-side built-in fan): 300W max. with built-in fan airflow.

4. Provides peak power to 600W within 500µs for all models; for longer duty duration please contact manufacturer.

5. Ripple & noise is measured from 10kHz to 20MHz bandwidth and with a 0.1µF ceramic and a 22µF electrolytic capacitor in parallel across the output.

6. 1% minimum load is required to maintain the ripple and regulation specifications.

7. Output is fully isolated.