Wall Industries, Inc.

Rev B

PSPRL0801 SERIES

150~300 Watts, AC/DC Switching Power Supplies

09/05/2014

Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797

website: www.wallindustries.com • e-mail: sales@wallindustries.com

Page 4 of 5

MECHANICAL DRAWINGS

Enclosed with End-Side Built-in Fan Models (Suffix “E”): 6.50 x 3.20 x 1.60 Inches; Weight: 1.43 lbs

Input Connector (CN1):

Output Connector (CN2):

Mating Molex Part No. VHR-6N

Terminal block - Dinkle P830N, M5 screws

Mounting Inserts: 6 Places M3. Maximum penetration 3.8mm

Logic Signal Connector (CN3):

Mating JST XHP-4 or equivalent (CHYAO SHIUNN JS-2001-04);

Mating Pins: JST SXH-002T-P0.6 for AWG 30 to 26.

Fan Driver Connector (FAN1):

12VDC/300mA is available to drive an external fan. Mating connector is

JST P/N XHP-3 (3 pins 0.98 pitch) or equivalent (CHYAO SHIUNN JS-2001-03)

IEC320 snap-in mounting type or

Terminal block: Howder HD-602-3P

Unit: inches [mm]

B 4:1 (6 PL)

M3X0.5

0.177 [4.50]

0.197 [5.00]

MATING JST MODEL NO. VHR-6N (6 PINS)

OR EQUIVALENT

DINKLE PCB TERMINAL

P-830N

2 PINS M5 SCREW

TERMINAL BLOCK

3 PINS 6.35mm CENTER

HD-602-3P

IEC320 OR EQUIVALENT

4.50 [114.30]

0.25 [6.35]

2.70 [68.58]

1.75 [44.52]

0.32 [8.26]

1.60 [40.64]

6.50 [165.10]

Enclosed with Top-Side Built-in Fan (Suffix “F”): 5.00 x 3.20 x 2.00 Inches; Weight: 1.32 lbs

Unit: inches [mm]

COVER WITH BUILT-IN DC FAN

FOR PSPRL0801F SERIES

Input Connector (CN1):

Mating Molex Part No. VHR-5N or equivalent (5 pins, 3 used) or

Terminal block: Howder M3 screws 3 pin 6.35mm center Part No. HD-601-3P

PCB Labeling: L=Line; N-Neutral; G=Ground

Output Connector (CN2):

Mating Molex Part No. VHR-6N

Terminal block - Dinkle P830N, M5 screws

Mounting Inserts: 6 Places M3. Maximum penetration 3.8mm

Logic Signal Connector (CN3):

Mating JST XHP-4 or equivalent (CHYAO SHIUNN JS-2001-04);

Mating Pins: JST SXH-002T-P0.6 for AWG 30 to 26.

Fan Driver Connector (FAN1):

12VDC/300mA is available to drive an external fan. Mating connector is

JST P/N XHP-3 (3 pins 0.98 pitch) or equivalent (CHYAO SHIUNN JS-2001-03)

2.50 [63.50]

2.00 [50.8]

CHASSIS

FAN

4.50 [114.30]

5.00 [127.0]