COMMERCIAL

NETWORKING

—

COPPER

15.13

BIX Cross-Connect System

Distribution Connectors, Multiplying Connectors

and Modular Jack Connectors

BIX Distribution Connector

The BIX Distribution Connector is a 25-pair connector. The connector's symmetrical construction

allows termination of cables on one side and cross-connect jumper wires or BIX Patch Cords on the

other. Each BIX connector is equipped with 50 double-ended Insulation Displacement Connection (IDC)

clips for terminating plastic insulated solid copper conductors without stripping and pair splitters on

each side of the connector facilitate wire insertion.

BIX Multiplying Connector

BIX Multiplying Connectors are used to generate multiple outputs from a single input. Construction of

these connectors is identical to that of BIX Distribution Connectors, except for the IDC clips which are

bridged. BIX Multiplying Connectors are typically used in voice applications.

The QCBIX2A Connector is built using 24 sets of bridged clips (2 clips each). It is used to terminate

various facilities where multiples of 2 are required.

The QCBIX5A Connector is built using 10 sets of bridged clips (5 clips each). It is used for multiple

jumper connections to the same equipment.

The QCBIX7A Connector is built using 10 sets of bridged clips (four 2-clip and six 7-clip bridged

arrangements). It is primarily intended for use with 1A type key telephone systems. Each connector

can terminate up to three lines of key equipment providing service to as many as seven key telephone

sets per line.

BIX Modular Jack Connector

BIX Modular Jack Connectors provide a fast and flexible method to manage small-to-medium cross-

connect installations. These connectors are built with a BIX connector pre-wired to standard modular

jacks. They allow front-access termination and patching.

The NXXCBMC6U Connector is a 6-port, 8-position modular connector used for data applications.

It exceeds all Category 5e channel requirements when used with PS5E Modular Cords in a

Belden IBDN 1200 System.

QCBIX36-type Connectors are used mostly for voice applications. The QCBIX36D connector is a

6-port, 8-position modular connector. It is pre-wired to USOC 8-wire wiring scheme specifications.

The QCBIX36C connector is an 8-port, 6-position modular connector. It is pre-wired to USOC 6-wire

wiring scheme specifications. The QCBIX36B connector is a 12-port, 6-position modular connector.

It is pre-wired to USOC 4-wire wiring scheme specifications.

A0393146 QCBIX1A4 Connector

A0266827 QCBIX5A Multiplying Connector

Belden Part Number

Description

BIX Cross-Connect System

Distribution Connector

BIX Distribution Connector, 5-pair Marking

A0266828

BIX Distribution Connector, 4-pair Marking

A0393146

Multiplying Connector

BIX Multiplying Connector, QCBIX2A, 25-pair, 12x2-pair

A0269923

BIX Multiplying Connector, QCBIX5A, 25-pair, 5x5-pair

A0266827

BIX Multiplying Connector, QCBIX7A, 25-pair, 2x2-pair & 3x7-pair

A0269925

Modular Jack Connector

BIX Modular Jack Connector, NXXCBMC6U, 6-port, PS5E, T568A/B Coded

AX100798

BIX Modular Jack Connector, QCBIX36D, 6-port, USOC, 8-pin

A0341173

BIX Modular Jack Connector, QCBIX36C, 8-port, USOC, 6-pin

A0330864

BIX Modular Jack Connector, QCBIX36B, 12-port, USOC, 4-pin

A0330863

These products are in the process of being assessed for RoHS compliance. Please check our Web Site for the most current RoHS status.

AX100798 BIX Modular Jack Connector