COMMERCIAL

NETWORKING

—

COPPER

15.14

BIX Cross-Connect System

Mounts, Covers and Wire Management Accessories

Belden Part Number

Description

BIX Cross-Connect System

BIX Mount

BIX Mount, QMBIX12E (300-pair)

A0340836

BIX Mount, QMBIX10A (250-pair)

A0270164

BIX Mount, QMBIX10C (50-pair)

A0284798

BIX Mount with Cover

BIX Mount with Cover, (Locking), 50-pair

A0277853

BIX Mount with Cover, (Snap-on), 50-pair

A0277854

BIX Locking Cover

BIX Locking Cover, for QMBIX12E (300-pair)

A0340838

BIX Locking Cover, for QMBIX10A (250-pair)

A0285986

BIX Cover

BIX Cover, QMBIX10A, Stand-alone installation, locking

A0276396

BIX Cover, QMBIX10A, Stand-alone installation, non-locking

A0276394

Distribution Ring

Distribution Ring

A0270168

These products are in the process of being assessed for RoHS compliance. Please check our Web Site for the most current RoHS status.

BIX Mount

BIX Mounts are basic components used in building a cross-connect system. They can accept BIX

Distribution, Multiplying or Modular Jack Connectors. The 300 and 250-pair mounts can be

wall-mounted or installed on BIX Frames. These mounts feature an interlocking design allowing

them to be stacked for larger cross-connect installations.

The BIX 50-pair Mount is typically used in small cross-connect installations. Also available is a 50-pair

mount with cover that is sold as an assembly and is typically used in small cross-connect installations

where security and/or dust protection is required.

BIX Cover

BIX Covers can be used to restrict access of cross-connect installations for better protection and

security. Two sizes are available to suit either the QMBIX12E 300-pair mount or the QMBIX10A

250-pair mount. The two locking covers used in wall or frame-mounted installations are molded

with translucent plastic allowing visual inspection. Also available are two covers used exclusively in

stand-alone QMBIX10A 250-pair mount installations: one locking, the other non-locking—both have

four cable entries, one at each corner.

Distribution Ring

The Distribution Ring is used in wall mount installations providing a cross-connect channel for jumper

wires, patch cords and cables. The Distribution Ring interlocks with the QMBIX12E or QMBIX10A

mounts, providing proper spacing and alignment.

A0340836 QMBIX12E BIX Mount, 300-pair

A0284798 QMBIX10C BIX Mount, 50-pair

A0277853 QMBIX31A 50-pair Mount

with Locking Cover

A0285986 Locking Cover for 250-pair Mount

A0276396 BIX Cover, QMBIX10A,

Stand-alone installation, Locking

A0270168 Distribution Ring