| поискавой системы для электроныых деталей |
|
CS4297 датащи(PDF) 42 Page - Cirrus Logic |
|
|
|||||||||||||||||||||||||||||
CS4297 датащи(HTML) 42 Page - Cirrus Logic |
|
42 / 46 page ![]() 42 DS242F5 CS4297 CrystalClear™ SoundFusion™ Audio Codec ’97 LINE_OUT_L and LINE_OUT_R - Analog Line Level Outputs These signals are analog outputs from the stereo output mixer. The full scale output voltage for output is nominally 1 VRMS and is internally biased at the Vrefout voltage reference. It is required to either AC couple these pins to external circuitry or DC couple them to a buffer op- amp biased at the Vrefout voltage. These pins need a 680 pF NPO capacitor attached to analog ground. ALT_LINE_OUT_L and ALT_LINE_OUT_R - Analog Alternate Line Level Outputs These signals are analog outputs from the stereo output mixer. The full scale output voltage for each output is nominally 1 VRMS and is internally biased at the Vrefout voltage reference. It is required to either AC couple these pins to external circuitry or DC couple them to a buffer op- amp biased at the Vrefout voltage. These pins need a 680 pF NPO capacitor attached to analog ground. MONO_OUT, Analog Mono Line Level Output This signal is an analog output from the Mono output mixer. This is a left and right channel mix of the output of the stereo input mixer. The full scale output is nominally 1 VRMS and is internally biased at the Vrefout voltage reference. AC coupling to external circuitry is required. This pin needs a 680 pF NPO capacitor attached to analog ground. Filter and Reference Pins REFFLT - Internal Reference Voltage, Input This is the voltage reference used internal to the part. A 0.1 µF and a 1 µF (must not be larger than 1 µF) capacitor with short, wide traces must be connected to this pin. No other connections should be made to this pin. Vrefout - Voltage Reference, Output All analog inputs and outputs are centered around Vrefout which is nominally 2.2 Volts. This pin may be used to level shift external circuitry, however any external loading should be buffered. AFLT1 - Left Channel Antialiasing Filter Input This pin needs a 390 pF NPO capacitor attached to analog ground. AFLT2 - Right Channel Antialiasing Filter Input This pin needs a 390 pF NPO capacitor attached to analog ground. |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |