MP9181 datasheet(2/19 Pages) MPS

2 / 19 page

MP9181 – 3A, 4.5V-20V INPUT, FAST TRANSIENT SYNCHRONOUS STEP-DOWN CONVERTER IN QFN12 (2X3mm)

MP9181 Rev 1.01

www.MonolithicPower.com

12/10/2012

MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.

ORDERING INFORMATION

Part Number

Package

Top Marking

MP9181DD

QFN12 (2x3mm)

AEH

* For Tape & Reel, add suffix –Z (e.g. MP9181DD–Z).

For RoHS Compliant Packaging, add suffix –LF (e.g. MP9181DD–LF–Z)

PACKAGE REFERENCE

GND

BST

VCC

GND

FREQ

TOP VIEW

GND

QFN12 (2x3mm)

ABSOLUTE MAXIMUM RATINGS (1)

Supply Voltage VIN ....................................... 22V

VSW... -0.3V (-4V<10ns) to VIN+0.3V (24V<10ns)

VBST ...................................................... VSW + 6V

IVIN (RMS)........................................................ 3.5A

All Other Pins..................................-0.3V to +6V

Continuous Power Dissipation

(TA = 25°C)

(2)

QFN12 (2X3mm)........................................ 1.8W

Junction Temperature ..............................150

°C

Lead Temperature ....................................260

°C

Storage Temperature............... -65

°C to +150°C

Recommended Operating Conditions

(3)

Supply Voltage VIN ...........................4.5V to 20V

Output Voltage VOUT.....................0.815V to 13V

Operating Junction Temp. (TJ). -40°C to +125°C

Thermal Resistance

(4)

θJA

θJC

QFN12 (2mmx3mm)............... 70 ...... 15...

°C/W

Notes:

1) Exceeding these ratings may damage the device. About the

details of EN pin’s ABS MAX rating, please refer to Page 12

Enable Control section.

2) The maximum allowable power dissipation is a function of the

maximum junction temperature TJ (MAX), the junction-to-

ambient thermal resistance θJA, and the ambient temperature

TA. The maximum allowable continuous power dissipation at

any ambient temperature is calculated by PD (MAX) = (TJ

(MAX)-TA)/θJA. Exceeding the maximum allowable power

dissipation will cause excessive die temperature, and the

regulator will go into thermal shutdown. Internal thermal

shutdown circuitry protects the device from permanent

damage.

3) The device is not guaranteed to function outside of its

operating conditions.

4) Measured on JESD51-7, 4-layer PCB.

MP9181 датащи(PDF) 2 Page - Monolithic Power Systems

MP9181 датащи(HTML) 2 Page - Monolithic Power Systems

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

датащи скачать

ссылки URL