G-06-G

Note: Design Kit Contents are subject to change without notice.

25

DESIGN ENGINEERING KITS

CERAMIC CHIP SAFETY CAPACITORS

(250 VAC)

GD Series SMD

For availability check with your Murata Sales Contact. Part numbers in kits depend on application.

I

A new monolithic structure for small, high capacitance capable of operating at high voltage levels.

I

The type GD can be used as a Y3-class capacitor.

I

Available for equipment based on IEC/EN60950 and UL1950.

I

+125 degree C guaranteed

I

Only for reflow soldering

I

The low-profile type (thickness: 1.5mm max.) is available. Fit for use on thinner type equipment.

I

Working Voltage: 250 VAC

GF Series SMD

For availability check with your Murata Sales Contact. Part numbers in kits depend on application.

I

A new monolithic structure for small, high capacitance capable of operating at high voltage levels.

I

The type GF can be used as a Y2-class capacitor.

I

Available for equipment based on IEC/EN60950 and UL1950. The GA352/355 types are available for equipment based on IEC/EN60065,

UL1492, and UL6500.

I

+125 degree C guaranteed

I

Only for reflow soldering

I

The low-profile type (thickness: 1.5mm max.) is available. Fit for use on thinner type equipment.

I

Working Voltage: 250 VAC

KX Series Leaded Safety Kit

For availability check with your Murata Sales Contact. Part numbers in kits depend on application.

I

Operating temperature range guaranteed up to 125 degrees (UL: 85 deg.)

I

Dielectric strength: AC4000V

I

Class X1/Y1 capacitors which are recognized by UL/CSA/BSI/SEMKO/SEV/VDE/FIMKO/NEMKO/DEMKO/IMQ.

I

Possible to use with a component in appliance requiring reinforced insulation and double insulation based on UL1492, IEC60065 and

IEC60950.

I

Coated with flame-retardant epoxy resin (conforming to UL94V-0 standard).

I

Cost-saving automatic insertion available.

I

Available product for RoHS Restriction (EU Directive 2002/95/EC)

I

Working Voltage: 250 VAC

KY Series Leaded Safety Kit

For availability check with your Murata Sales Contact. Part numbers in kits depend on application.

I

Operating temperature range guaranteed up to 125 degrees (UL: 85 deg.)

I

Dielectric strength: AC2000V (In case of lead spacing F=5mm), AC2600V (In case of lead spacing F=7.5mm)

I

Class X1/Y2 capacitors which are recognized by UL/CSA/BSI/SEMKO/SEV/VDE/FIMKO/NEMKO/DEMKO/NSW.

I

Coated with flame-retardant epoxy resin (conforming to UL94V-0 standard).

I

Cost-saving automatic insertion available.

I

Available product for RoHS Restriction (EU Directive 2002/95/EC)

I

Working Voltage: 250 VAC

RADIAL LEADED DISC SAFETY CAPACITORS

(250 VAC)